Overview
The Baer Brakes 2000006 is a pair of premium clear anodized aluminum wheel spacers, 0.875 inch thick, for 4-lug wheels on the 4×100, 4×108 and 4×114.3 bolt patterns. A wheel spacer sits between the hub and the wheel to push the wheel outboard, a common way to gain room for larger brake calipers and rotors.
Baer machines these spacers from 6061-T6 billet aluminum in the USA and describes them as universal-fit, so they are not built around one vehicle. Fit depends on bolt pattern, center bore and stud length rather than a model list, so measure your hub and studs before you order.
Key features
- Pair of 0.875 inch thick spacers, sold as two units
- Covers 4×100, 4×108 and 4×114.3 bolt patterns
- Machined from 6061-T6 billet aluminum
- Clear anodized finish in silver
- Four lug holes of 0.562 inch diameter
- Premium grade, made in the USA
Torque and retorque routine
Lug nut torque is where spacers most often cause trouble. A spacer adds a second contact surface where the hub, spacer and wheel meet, and that surface can settle slightly during the first miles of driving. Tighten the nuts evenly in a star pattern with a torque wrench, then check them again after the first drive and at regular intervals during the first month.
Clean the hub face and both spacer faces before fitting, and remove any corrosion or paint that could stop the spacer from seating flat. A quick visual check at each tire rotation will catch loose studs, cracked spacer bores or a wheel that sits crooked. Replace worn studs at the same time, since a stretched or stripped stud will not hold a spacer securely.
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 2000006 |
| UPC | 844165004677 |
| Quantity | Pair (2 wheel spacers) |
| Material | 6061-T6 billet aluminum |
| Finish | Clear anodized |
| Color | Silver |
| Thickness | 0.875 inch |
| Spacer outside diameter | 6.000 inch |
| Center bore | 2.560 inch |
| Stud hole diameter | 0.562 inch |
| Lug hole quantity | 4 |
| Bolt hole pattern | 4×100, 4×108, 4×114.3 |
| Mounting hardware included | No |
| Grade | Premium |
| Country of origin | US |
Vehicle fitment
No vehicle year, make or model is named for this spacer. Because it is universal-fit, match it by bolt pattern (4×100, 4×108 or 4×114.3), the 2.560 inch center bore and the 0.562 inch stud holes.
Spacers are not vehicle-specific, so a matching bolt pattern does not guarantee brake or wheel clearance on every hub. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check thread engagement before fitting. Baer warns that most cars cannot take more than 1/4 inch (.250) of spacing on stock studs, so longer studs of the proper length are usually required for a 0.875 inch spacer. Hardware is not included, so plan on matching studs and lug nuts. Recheck lug torque after the first drive.
What’s included
Two aluminum wheel spacers, each 0.875 inch thick, sold as a pair.
Not included: Mounting hardware, meaning studs and lug nuts.












