Overview
The Bilstein 24-185042 is a front left monotube gas-charged shock absorber from the 4600 Series, and the manufacturer fitment list places it on the 2005–2015 Toyota Tacoma (Base). It is the front left position, so it serves the left side of the front suspension on the listed truck and is sold as a single unit. Anyone shopping for a left front Tacoma shock with a 2 in body diameter will find the position, body size and fitment stated here.
The shock uses a single tube and a dividing piston. The piston gives the oil room to grow as it warms, which limits foaming and thinning so the damping holds at higher temperatures. Heat moves from the oil through the shock body to the outside. The tube is extruded to a close tolerance, which keeps its wall even along the length. Compression and rebound damping are tuned separately through the piston head, and the design has fewer components than twin tube shocks.
Key features
- Front left position in the 4600 Series monotube line
- Gas charged, with a dividing piston that manages oil expansion
- Extruded tube with tight peak-to-valley tolerance and consistent wall thickness
- Piston head tuned separately for compression and rebound
- Fewer parts than conventional twin tube shocks
- Dust boots included
Replacing one side or both
A single front left shock is a position-specific part, so the replacement has to sit on the same corner as the unit it replaces. When one side wears, the other side often isn’t far behind, and a new shock beside an old one can change steering feel and how the truck settles. Owners often compare both front shocks at the same time to keep the truck balanced.
Before fitting, inspect the upper mount, the bushings and the boots on the removed unit. Worn bushings can cause clunks and let the shock sit crooked, which shortens the life of a new shock. Keep fasteners at the vehicle’s service values and check them again after the first few drives.
- Verify the front left position before fitting
- Inspect upper mount and bushings
- Check boots for tears
- Recheck fasteners after the first drives
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 24-185042 |
| UPC | 651860562162 |
| Shock series | 4600 Series |
| Position | Front Left |
| Type | Monotube, gas charged |
| Body diameter | 2 in |
| Reservoir | No |
| Boots included | Yes |
| Finish | Yellow |
| Lift height | 0 in lift/drop |
| Fitment type | Direct fit |
Vehicle fitment
This shock covers the 2005–2015 Toyota Tacoma in the Base trim only. Other Tacoma generations and other Toyota trucks fall outside its coverage.
Other Tacoma generations and other Toyota trucks are not covered by this entry. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
This entry covers one front left shock, so a matched pair needs a second unit for the opposite front corner. Confirm the front left position on your vehicle before fitting, because the shock is position-specific.
What’s included
One front left shock absorber with dust boots.
Not included: the opposite front shock, which is a separate part.









