Overview
It is a rear shock absorber for the 2016 through 2024 Nissan Titan XD, limited to 4WD diesel models with up to 1 inch of rear lift.
The shock has a smooth, non-coilover body with a zinc-plated finish and no reservoir. Its collapsed length is 16.20 inches and its extended length is 25.81 inches. The unit is a monotube design with a digressive piston, which Bilstein describes as reacting to changing road conditions, and the damping is tuned for the specific application.
Because the shock is limited to 4WD diesel trucks, check the drive type and engine on your Titan XD before ordering. A gas-engine Titan XD or a two-wheel-drive truck is outside the stated application.
Key features
- Rear lift of up to 1 in
- 4WD diesel models only
- Smooth non-coilover body with a zinc-plated finish
- Collapsed length 16.20 in and extended length 25.81 in
- Monotube design with a digressive piston
Diesel 4WD rear damping
Heavy-duty pickups with diesel engines carry more weight and torque than lighter trucks, so the rear shocks work harder under towing and braking. A damper designed for the truck’s rear lift helps control the axle as it loads and unloads, and it keeps the rear end settled over rough roads and when the bed carries cargo.
When fitting a shock to a Titan XD, check the rear springs, bump stops and mount bushings, since worn parts there reduce how well a new shock performs. Tow capacity and payload matter too: a rear end that sags or bottoms out under load suggests the shock is at its limit. Signs of wear include oil on the body, knocking over bumps and uneven tire wear.
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 33-268996 |
| Shock series | 5100 Series |
| Position | Rear |
| Rear lift | Up to 1 in |
| Drive and engine | 4WD diesel models |
| Collapsed length | 16.20 in |
| Extended length | 25.81 in |
| Body | Smooth, non-coilover |
| Finish | Zinc plated |
| Reservoir | No |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2016 through 2024 Nissan Titan XD, the heavier-duty version of the Titan, in the 4WD diesel configuration.
Nissan Titan models that are not the XD, and Titan XD models before 2016 or after 2022, are not on this list. Confirm your vehicle’s year, model and trim before ordering.
What’s included
Part 33-268996: one rear shock absorber, sold individually.
Installation notes
Check the drive type and engine before fitting, because the shock only fits 4WD diesel trucks. After installation, confirm the rear ride height matches the up to 1 inch of lift the shock is rated for.









