Overview
The Bilstein 24-029056 is a rear 4600 Series shock absorber with a 2 inch monotube body, gas charged and yellow, with dust boots included and no remote reservoir. Confirm fit for your vehicle’s year, model and trim before ordering.
Bilstein’s gas-pressure monotube draws heat out of the oil through the shock body. A dividing piston lets the oil expand as it warms, which helps the shock resist foaming and losing damping. The seamless extruded tube keeps wall thickness consistent, and the piston head can be tuned for compression and rebound separately, which supports ride comfort and long life.
Key features
- Gas charged monotube body with a 2 inch diameter
- Dividing piston manages oil expansion as temperatures rise
- Piston head allows independent compression and rebound damping
- Extruded seamless tube for consistent wall thickness
- Fewer parts than many conventional twin tube designs.
- Dust boots included and no remote reservoir
Choosing and fitting a rear shock
Rear shocks work with the springs and suspension geometry to control body motion over bumps and during braking. A monotube design like this one keeps oil and gas in a single body, which helps it run cooler under repeated off-road use than a twin tube shock of similar size. When choosing a replacement, match the mounting style and collapsed length to the shock you are removing, and consider whether the rest of the suspension has changed, since a lift or new springs alter the load on the shock.
Shocks wear out gradually. Look for oil seeping down the body, a bouncy ride that continues after the vehicle has stopped moving, or uneven tire wear. Shocks are usually replaced in pairs on the same axle so the ride stays balanced from side to side. Check the bushings and mounting hardware at the same time, because worn bushings can make a new shock feel loose.
- Measure the old shock’s mounting points and collapsed length first
- Inspect bushings and brackets during replacement
- Replace both rear shocks together for balanced damping
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 24-029056 |
| UPC | 651860487823 |
| Series | 4600 Series |
| Body diameter | 2 in |
| Tube type | Monotube |
| Charge | Gas charged |
| Finish | Yellow |
| Reservoir | No |
| Boots included | Yes |
| Position | Rear |
| Fitment type | Direct fit |
| Lift height | w/0 in. Lift/Drop |
Installation notes
Compare the mounting points and collapsed length of the shock you are replacing with this rear unit before fitting it.
Vehicle fitment
Confirm fit for your truck or SUV’s year, model and trim before installing this shock.
Do not rely on the 4600 Series name or other Bilstein part numbers to judge fit for your vehicle. Confirm your vehicle’s year, model and trim before ordering.
What’s included
The dust boots are included, and the lift and drop setting is 0 in. Check the mounting hardware your installation needs before starting.









