Overview
The Bilstein 24-187244 is a 46mm monotube gas pressure shock absorber for the front position of 1996–2002 Toyota 4Runner models in Base, Limited and SR5 trims. It belongs to the 4600 Series, is a direct fit, and has 0 inches of lift or drop, so it suits a stock-height suspension.
The monotube body moves heat from the oil to the outer surface of the shock, where it dissipates more efficiently. A dividing piston lets the oil expand as it warms, which prevents foaming and loss of damping as temperatures rise. The shock is heavy duty and finished in yellow.
Key features
- Monotube gas pressure construction with a dividing piston that lets the oil expand as heat builds
- Seamless tube made by a special extrusion method, which Bilstein says gives a tight peak-to-valley tolerance and consistent wall thickness
- Piston head designed for independent tuning of compression and rebound damping
- Uses fewer components than typical twin tube and road sensing shock designs
- Front position direct fit replacement shock with 0 inches of lift or drop
- Heavy duty build in yellow
Front shock maintenance basics
Front shocks help control body motion during braking and steering, and they also keep the tires in contact with the ground over uneven terrain. A worn front damper can cause nose dive, wander on the highway or a loose feel in steering. Because the front suspension carries steering loads, the mounts and bushings deserve as much attention as the shock body.
Routine inspection is simple. Check the shock body for oil seepage, look at the upper and lower mounts for play, and inspect the dust boot for splits. Replacing front shocks in pairs keeps the steering feel even. After any off-road trip, recheck the fasteners, since rough terrain can loosen them.
- Check upper mount for play
- Look for oil seepage at the seal
- Inspect dust boots for splits
- Replace front shocks in pairs
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 24-187244 |
| Old part number | BILF4-BE5-F332-H1 |
| UPC | 651860641409 |
| Shock series | 4600 Series |
| Size | 46mm monotube |
| Position | Front |
| Fitment type | Direct fit |
| Lift height | 0 in. lift/drop |
| Hydraulic / gas charged | Gas charged |
| Color | Yellow |
Vehicle fitment
The manufacturer fitment list covers the 1996–2002 Toyota 4Runner in the Base, Limited and SR5 trims. The shock is a front position replacement for those vehicles.
The 2003 and newer 4Runner generations are not covered by this list, and no other Toyota or non-Toyota model is listed. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A direct fit with 0 inches of lift means it is meant to replace an existing front shock rather than change the stance. Plan the removal steps and support the vehicle securely before working near the suspension.
What’s included
Check the included parts against your installation before starting, including any mounting hardware you need.









