Overview
The Bilstein 24-191203 is a 5100 Series monotube shock absorber for lifted trucks, Jeeps and prerunners. It is a non-coilover shock with a 46mm ID smooth body, a 14mm shaft and eye mounts at both ends. It fits a range of Chevrolet Silverado, GMC Sierra, Dodge Ram and 2011–2012 Ram trucks.
Bilstein’s 5100 Series uses its traditional monotube technology with a high gas pressure design, built for steady performance and long service life. Self-adjusting deflecting disc valving, a high-flow piston and a larger working piston area work together to give control with large diameter tires.
Key features
- Self-adjusting deflecting disc valving.
- High-flow piston that reduces harshness.
- Independent rebound and compression tuning.
- Larger working piston area for exact damping.
- Designed for control with large diameter tires.
- Designed for specific manufacturer lift kits that use the stock O.E.M. mounting configuration.
Lift kit compatibility
A lifted truck changes the geometry the shock works in. Longer control arms and lift components alter the angle and travel of the shock, so the eye mounts and shaft length need to suit the new layout. Forcing a shock into a mount that is slightly off-angle can bind it and shorten its service life.
Large tires add weight and rotating mass, which is why damping control matters more on these trucks. When upgrading shocks alongside a lift, it is common to replace the bump stops and check the brake lines and sway bar links, since they are often disturbed by the new height.
- Measure the installed length before ordering
- Check the boot for cuts after the first off-road trip
- Re-torque mounting bolts after a short break-in drive
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 24-191203 |
| UPC | 651860558202 |
| Shock series | 5100 Series |
| Collapsed length | 16.95 in. |
| Extended length | 27.36 in. |
| Travel length | 10.41 in. |
| Lower mount | Eye, 14.4mm |
| Upper mount | Eye, 14.4mm |
| Shaft diameter | 14mm |
| Body | 46mm ID smooth body, non-coilover |
| Design | Mono tube, gas pressure |
| Reservoir | No |
| Boot included | Yes |
| Finish | Zinc plated |
| Fitment type | Direct fit |
Vehicle fitment
The manufacturer list covers Chevrolet Silverado and GMC Sierra 1500 models from 1999 to 2006 with 2007 Classic versions, the 1500 HD, 2500 and 3500 models in the early and mid 2000s and through 2010, Dodge Ram 1500 for 1994–2001 and 2006–2008, Dodge Ram 2500 and 3500 for 1994–2010, and Ram 2500 and 3500 for 2011–2012.
Model years from 2013 onward and Dodge Ram 1500 years 2002 through 2005 are not on the list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Mounting follows the stock O.E.M. configuration, and the shock is designed for specific manufacturer lift kits. Confirm your lift kit is one of those, and check the eye mounts and 14mm shaft against your existing hardware before fitting.
What’s included
One shock absorber with boot included. Check mounting hardware, bushings and lift components against your installation before fitting.
Not included: a lift kit. The shock is designed for specific manufacturer lift kits.









