Overview
The Artec Industries BR1011 is a set of lower link axle brackets for universal applications, supplied as a pair in 1/4 inch thick mild steel. It has a 2.65 inch joint mounting width and a 10 degree angle, and it is designed to hold common cartridge joints such as Johnny, flex and ballistic types.
The bottom skid plate wraps around the joint to reduce direct impact and wear. The shape is formed rather than angle iron or c-channel, and the grease fitting is reachable from above. Rod ends are not included with the pair.
Key features
- Lower link mounting for universal axle applications
- 2.65 inch joint mounting width; 2.625 inch with 9/16 inch bolt hole in the detailed copy
- Can be drilled out for 1.25 inch rod ends with spacers
- Made from 1/4 inch thick boxed steel plate for strength and impact resistance
- Grease fitting access on top for maintenance
- Skid plate protects the joint and does not restrict its movement
Lower link geometry
Lower links control the fore-aft position of the axle and help set pinion angle. The angle built into a lower link bracket changes how the link lines up with the axle and frame, so it affects how the suspension behaves under load. Before fitting, measure link length and check that the joint can swing through its range without contacting the frame or driveline.
Lower link joints take a steady share of the drive load, so they wear faster than many other joints. Check the bolts that hold the bracket after the first few trail runs, and look for play at the joint, a bent link or a bracket that has shifted. Axle bushings and link bolts are often inspected at the same time.
Specifications
| Brand | Artec Industries |
|---|---|
| Product code | BR1011 |
| UPC | 816791020185 |
| Material | 1/4 inch thick mild steel, boxed steel plate per the detailed copy |
| Joint mounting width | 2.65 inch |
| Bolt hole | 9/16 inch |
| Angle | 10 degree |
| Quantity | Pair |
| Rod end | Not included |
| Finish | Bare steel |
Vehicle fitment
This is a universal application bracket with no vehicle named. The lower link arrangement depends on the axle and frame geometry of your build, so those set the final fit. Check the 10 degree angle and mounting height against your build before installing.
No year, make or model is named for this bracket. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Confirm whether the pair bolts on or needs welding before cutting or drilling. The 9/16 inch bolt hole can be opened for 1.25 inch rod ends with spacers, and it can be modified for smaller joints. Test fit the joint through the skid plate before final mounting.
What’s included
A pair of BR1011 lower link axle brackets, bare steel.
Not included: Rod ends are not included, and the joint must be chosen separately.












