Overview
The Artec Industries BR1013 is a dual 4-link bracket set for universal applications, with upper and lower frame mounts. It comes as a pair, with 2 brackets included, and is made from 1/4 inch thick boxed steel plate. It is built to hold a cartridge-style joint at a 2.625 inch mounting width, which covers the common Johnny, flex and ballistic joints that Artec names.
Artec presents the design as a formed piece rather than a modified angle iron or c-channel bracket. The top grease fitting access allows easier maintenance of the joint, and the bottom skid plate wraps around the joint to protect it from direct impact while leaving joint movement free. Rod ends are not included, so choose the joint separately.
Key features
- Upper and lower frame mounts in one dual 4-link set
- 2.625 inch mounting width with 9/16 inch bolt hole for cartridge joints
- Grease fitting access on top of the bracket
- Bottom skid plate wraps around the joint and does not restrict its movement
- 1/4 inch thick boxed steel plate
- Bore can be drilled out for 1.25 inch rod ends with spacers, or modified for smaller joints
Choosing a cartridge joint
A dual 4-link bracket sets the axle position relative to the frame, so the joint inside it carries braking, acceleration and side loads. Choosing the joint is part of choosing the bracket. Match the joint’s mounting width and bolt size to the bracket’s holes, and compare rod end type and load rating before buying. Johnny, flex and ballistic joints share a similar mounting format, but their internal parts and grease points differ.
Once installed, the joint should move freely through its full range. Grease it regularly, especially after water crossings and mud runs. Look for play at the rod end, torn boots or a stiff joint that binds at full travel. Those signs point to wear that is best caught early, before the joint loosens the bracket bolts or stresses the frame.
Specifications
| Brand | Artec Industries |
|---|---|
| Product code | BR1013 |
| UPC | 816791020208 |
| Material | 1/4 inch thick mild steel, formed as boxed steel plate. |
| Joint mounting width | 2.625 inch joint mounting width. |
| Bolt hole | 9/16 inch |
| Quantity | Pair, 2 brackets included |
| Mount | Upper and lower frame mounts |
| Rod ends | Not included |
| Application | Universal |
Vehicle fitment
This is a universal bracket with no vehicle named. It is meant for upper and lower frame mounts in custom four-link builds, so frame layout and joint choice decide the fit.
Because no vehicle is listed, check frame and axle clearance against your build. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Confirm whether the set bolts on or needs welding before cutting or drilling the frame. Test fit the joint through the skid plate before final mounting, and open the 9/16 inch hole only if larger rod ends are used.
What’s included
A pair of Artec BR1013 brackets, two in total, with the upper and lower mounts.
Not included: Rod ends are not included.












