Overview
The Artec Industries BR1047 is a pair of boxed shock mounts that fit round tube, made from 3/16″ steel plate. The mounts are precision bent and tumble finished, and they have 1/2″ mounting holes for a 1-3/4 inch tube diameter.
The boxed design slides onto the tube, is welded in place and needs no hole alignment. It is universal fit, so no single vehicle applies.
Key features
- Boxed design fits round tube
- Made from 3/16″ steel plate
- Precision bent and tumble finished
- 1/2″ mounting holes
- Tube diameter 1-3/4 inches
- Sold as a pair
Shock mount loads
A shock mount takes the compression and rebound force of the shock every time the suspension cycles, so it works hard even on mild trails. Boxed mounts add stiffness around the tube, which helps resist bending at the weld. The tube wall thickness, weld penetration and the shock’s eye size all affect how long the setup lasts, so match them before buying a shock.
Good fit starts with a square cut on the tube and mounts that sit flush against it. Gaps leave the weld weaker, so take time with the fit-up. Check the holes for elongation and the welds for hairline cracks after each season of use, and replace any mount that shows damage.
- Confirm the shock eye size matches the mounting hole
- Check the fit-up before tacking the mount in place
- Look for cracked welds around the tube after rough use
Specifications
| Brand | Artec Industries |
|---|---|
| Part number | BR1047 |
| UPC | 816791020543 |
| Material | 3/16″ steel plate |
| Finish | Tumble finished |
| Mounting holes | 1/2″ |
| Tube diameter | 1-3/4 inches |
| Sold as | Pair |
| Fitment | Universal fit |
| Type | Shock tab |
Vehicle fitment
The BR1047 is universal fit, so it is not built for one vehicle. Fit depends on whether your shock mounting point uses a 1-3/4 inch round tube.
Shock tab fitment is universal, with no make or model attached. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the mount slides onto the tube and is welded in place, check the tube size and shock clearance before welding. Have a qualified fabricator make the weld.
What’s included
A pair of boxed shock mounts (set of 2).
Not included: shock absorbers and welding equipment.









