Overview
The Artec Industries BR1042 is a truss upper link mount for control arms that mount to a flat surface such as a truss, sold as a pair. Artec CNC cuts and bends each mount from 1/4″ thick mild steel.
The bend adds strength to the mount, so no additional reinforcement is needed. The inner width is 1.75″ and the mount is universal fit, so it is not built for one vehicle.
Key features
- Control arm mount designed for a flat surface such as a truss
- CNC cut and bent from 1/4″ thick mild steel
- Bend strengthens the mount; no additional reinforcement needed
- 1.75″ inner width
- Sold as a pair
Upper link function
Upper links control the axle’s fore and aft position and help resist torque when the vehicle accelerates or brakes. A truss mount spreads that force across a larger flat section than a single bolt-on tab, so the surface it welds to and the quality of the weld carry much of the load. Before welding, confirm the control arm lines up square to the axle and that the joint clears the tire and frame at full travel.
Upper links and lower links are often replaced together when a suspension is rebuilt, because worn bushings in one change how the other loads. Bushing condition, bent arms and cracked welds are the common signs of a worn truss joint. Recheck every weld after the first hard run, since flexing at the truss can show up as hairline cracks.
- Check the control arm is square to the axle before welding
- Look for cracks at the weld edges after hard use
- Replace worn lower link bushings at the same time
Specifications
| Brand | Artec Industries |
|---|---|
| Part number | BR1042 |
| UPC | 816791020475 |
| Material | Mild steel |
| Thickness | 1/4″ |
| Inner width | 1.75″ |
| Type | Control arm mount |
| Sold as | Pair |
| Tube diameter | Any |
| Fitment | Universal fit |
Vehicle fitment
This mount is universal fit. Its use depends on the truss or flat surface and the control arm it is paired with.
This truss mount has no named vehicle; fit depends on the flat surface. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Each mount is welded to the flat surface rather than bolted, so mark the location and fit the control arm before the final weld. Use a qualified welder for structural welds on a truss.
What’s included
A pair of truss upper link mounts.
Not included: the control arms and welding supplies.












