Overview
The Artec BR1008L is an adjustable link tower, a control arm mount for 3-link and 4-link suspensions, built for large joints with a 2.625-inch mounting width. It takes 1.25-inch rod ends with misalignment spacers and rebuildable cartridge style joints of 2.5-inch or 2.625-inch width, including Johnny, Flex and Ballistic designs.
The main reason to choose this tower is adjustability. Its holes sit 7, 8 and 9 inches from the axle centerline, so when tire size changes you move the link to the next higher hole instead of cutting off an old bracket and welding in a taller one. Artec made it from .250-inch thick steel in four unwelded pieces that jig together for assembly. The product is labeled universal fit, but it is a fabricated link mount sized for specific joints and axle tubes, not a vehicle-specific part.
Key features
- Mounting holes at 7, 8 and 9 inches from the axle centerline for fine suspension tuning
- Accepts joints with a 2.625-inch mounting width, including 1.25-inch rod ends with misalignment spacers
- Cartridge style joints of 2.5-inch or 2.625-inch width, such as Johnny, Flex and Ballistic designs
- 9/16-inch bolt hole that can be drilled out for larger sizes
- Made from .250-inch thick steel
- Four unwelded pieces that jig together for easy assembly
- Intended for 3-link and 4-link suspensions
Setting link height
The link height sets how the axle’s control arm angle changes through travel, which affects traction and how the axle reacts to braking. Choosing a hole is a trade-off between a flatter link and one that keeps more clearance. Make the choice on the bench with the tower fitted, not after the welds are cold.
When tire size changes, revisit the link position. A larger tire can shift the axle geometry enough to change the feel on the trail. Check link bushings, rod end play and the axle brackets each time you change height, since those parts carry the same loads as the tower.
- Test each hole position before final welding
- Check rod end play after tire changes
- Inspect link bushings for cracks
Specifications
| Brand | Artec Industries |
|---|---|
| Part number | BR1008L |
| UPC | 816791020147 |
| Type | Control arm mount (adjustable link tower) |
| Fitment type | Universal fit |
| Sold as | Single |
| Tube diameter | 3-1/4 inches |
| Mounting width | 2.625 inches |
| Bolt hole | 9/16 inch |
| Link hole positions | 7, 8 and 9 inches from axle centerline |
| Material thickness | .250 inch steel |
| Suspension type | 3-link and 4-link |
Vehicle fitment
The BR1008L is not tied to a specific vehicle. Its fit depends on joint width, link geometry and axle tube size, so measure those on your own build before welding.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The four pieces must be fitted together and jigged before welding, so plan the assembly on a flat bench. The bracket needs general welding and fabrication skills. Choose the link hole position before welding, since that hole sets the link height. Drill the 9/16-inch hole larger only if your joint requires it. Structural welds on suspension mounts should be done by someone qualified to weld them.
What’s included
One adjustable link tower bracket, supplied as four unwelded pieces that jig together and sold as a single.
Not included: Confirm the rod ends, cartridge joints, misalignment spacers, bolts and welding materials you need before starting.












