Overview
The Artec BR1031 is an adjustable panhard mount for axle, part number BR1031, made for 3-link or 4-link suspension builds. A panhard bar, also called a track bar, keeps the axle centered side to side, and this mount gives the bar an anchor on the axle at one of three hole positions.
Artec designed the mount’s geometry and clearances around other aftermarket parts such as hydraulic rams and coilovers, and it matches the style and strength of the truss it fits. It takes joints with a 1.75 inch mounting width, including 3/4 inch and 7/8 x 3/4 inch rod ends with high misalignment spacers.
Key features
- Three mounting holes at 5, 6 and 7 inches from axle centerline for fine tuning the suspension.
- Orientation choice: centered on the axle or offset toward the front edge of the axle.
- 1.75 inch mounting width for 3/4 inch and 7/8 x 3/4 inch rod ends with high misalignment spacers.
- Built for 3-link and 4-link setups.
- Clearance for hydraulic rams and coilovers.
- It can be trimmed to fit a 3.0 inch axle tube if needed.
Panhard bar geometry
A panhard bar keeps the axle centered side to side, so the mount’s position on the axle controls how much lateral movement the suspension allows. Moving the anchor point changes the bar’s angle through travel, which in turn changes how the axle reacts when the vehicle leans or turns.
Choosing a hole position is a balance. A mount closer to the centerline keeps the bar more level, while an offset position can help clear other parts. Consider the rams, coilovers and link layout already on the vehicle, since they limit which position will clear.
After installation, check that the bar moves freely through full travel and that the rod ends do not bind. Recheck the mounting bolts after the first few trail runs.
- Choose the hole position before final fitting
- Check clearance with rams and coilovers
- Confirm rod end size and spacers before welding
Specifications
| Brand | Artec Industries |
|---|---|
| Part number | BR1031 |
| UPC | 816791020369 |
| Type | Panhard mount |
| Joint mounting width | 1.75 inch |
| Hole positions | 5, 6 and 7 inches from axle centerline |
| Axle tube | 3.0 inch, can be trimmed to fit |
| Orientation | Centered on axle or offset to front edge |
| Sold as | Single |
Vehicle fitment
Fit depends on your axle tube, link setup and rod end size. Check those against the mount before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Choose the hole position and orientation before final fitting, since both change the bar’s geometry. Trim the mount only if the 3.0 inch axle tube needs it.
What’s included
One adjustable panhard mount, sold as a single.
Not included: panhard bar, rod ends and spacers.









