Overview
The Artec BR1040 is an adjustable inner frame bracket, part number BR1040, for control arm mounting. Its holes are spaced one inch apart so the bracket can be set to different frame heights, and it takes a 2.625 inch mounting width with a 9/16 inch bolt hole for common sized Cartridge Joints.
Artec built the bracket with a floating top gusset that lets it fit any frame height, and its shape looks formed rather than like angle iron or C-channel. The skid plate on the bottom wraps the joint for impact protection while allowing free joint movement.
Key features
- One inch of separation between each hole for adjustability.
- Floating top gusset allows the bracket to fit any frame height.
- Grease fitting access on top for maintenance of the joint.
- Skid plate wraps the bottom of the joint against direct impact and reduces premature wear.
- Skid plate design does not restrict joint movement.
- Can be drilled out for 1.25 inch rod ends with spacers.
- Can be modified for smaller joints.
Adjustable frame mounts
An adjustable frame bracket lets you place the joint where the link and frame geometry work together, rather than where a fixed bracket happens to land. Spacing between holes gives a range of positions, so the choice can be tuned after the frame is measured. Dry fit the joint at the chosen position and check clearance through full travel.
Once set, keep the adjustment hardware tight and check it after the first trail runs. Look for shifting, wear around the holes and a joint that binds at the extremes of its range. Keep the grease fitting reachable so the joint can be serviced without taking the bracket off.
- Dry fit before final mounting
- Recheck hardware after first runs
- Keep the grease fitting reachable
Specifications
| Brand | Artec Industries |
|---|---|
| Part number | BR1040 |
| UPC | 816791020451 |
| Type | Control arm mount |
| Mounting width | 2.625 inch |
| Bolt hole | 9/16 inch |
| Hole spacing | 1 inch |
| Tube diameter | Any |
| Sold as | Single |
Vehicle fitment
No vehicle is named for this bracket. It is a universal fit, so the frame height, joint size and tube layout of your build decide whether it works.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Set the height using the adjustment holes before final mounting, and confirm the joint clears the frame through its full range of movement. Keep the top grease fitting reachable once the joint is installed.
What’s included
One bracket, sold as a single.
Not included: cartridge joint and mounting hardware.









