Overview
The Artec Industries TJ3011 is a pair of lower control arm brackets for Dana 30 axles, made from 1/4 inch steel plate. They replace factory lower control arm brackets and are welded to the axle tube.
The design includes a horseshoe around the CAM bolt, laser etched with factory alignment lines to make adjustments easier. The bracket wraps around the axle tube more than the factory design, adding weld surface area and reducing the chance of tearing off. The formed style is a custom look rather than angle iron or c-channel.
Key features
- Pair of lower control arm brackets for Dana 30 axles.
- Constructed from 1/4 inch steel plate.
- 2.625 inch mounting width.
- Horseshoe around the CAM bolt, laser etched with factory alignment lines for adjustment.
- Wraps the axle tube for additional weld surface area.
- Formed design in place of angle iron or c-channel style brackets.
- Bare steel finish.
Alignment and CAM bolt adjustment
Lower control arm brackets with a CAM bolt horseshoe set the caster and camber range, so the alignment marks on the bracket become a reference point during setup. Set the CAM bolt to the marks first, then have the alignment checked on a wheel alignment rack before any further adjustment.
Dana 30 axles see a lot of articulation off road, which puts strain on the bracket welds and the CAM bolt area. Check the welds and the bolt tension after the first few trips, and recheck the alignment whenever the brackets or the CAM bolts have been adjusted or replaced.
- Set the CAM bolt to the etched alignment marks
- Have caster and camber checked after adjusting
- Inspect welds and CAM bolt tension after early trips
- Recheck alignment after any bracket work
Specifications
| Brand | Artec Industries |
|---|---|
| Part number | TJ3011 |
| UPC | 816791024282 |
| Axle | Dana 30 |
| Material | 1/4 inch steel plate |
| Mounting width | 2.625 inch |
| Quantity | Pair |
| Finish | Bare steel |
Vehicle fitment
The brackets are welded to the axle tube, so they are not a universal part. They fit Dana 30 axles. Confirm the year, model and trim of your vehicle, and check your axle setup before installing.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
These brackets need general welding and fabrication skills and are not bolt-on parts. Use the laser etched alignment lines on the CAM bolt horseshoe when setting adjustment. Only weld if you have the experience, and check the welds before off road use.
What’s included
The brackets come as a pair. Confirm whether bolts, sleeves or bushings are needed before starting the install.












