Overview
The Warrior Shock Absorber Cross Pin 107 is a replacement cross pin for worn or broken shock absorber pins, listed with a universal fit.
Warrior offers replacement pins in two sizes, 2-3/8 inch for the front and 3-1/8 inch for the rear. Measure the existing pin before choosing one.
Key features
- Replacement cross pin for shock absorbers
- For worn or broken pins
- Warrior offers 2-3/8 inch front and 3-1/8 inch rear sizes
- Confirm the pin length against your existing pin before ordering.
- Universal fit stated; no vehicle list
Signs a shock pin needs replacing
A shock cross pin connects the shock eye to the axle bracket, and it takes the movement of the suspension on every bump. When the pin wears or breaks, the shock can float, rattle or knock, and the axle may move more than it should. Worn pins often show up as a clunk over small bumps or a loose feel on the trail.
Replace the pin with the shock unloaded and the vehicle supported, so the shock can be moved freely and the bracket can be inspected. Check the shock eyes, bushings and bracket at the same time, since wear in those parts can have the same effect. Recheck the hardware after a short drive to confirm it has stayed tight.
- Check for play at the pin by hand with the shock unloaded
- Inspect the axle bracket for cracks or elongated holes
- Look at the shock eye and bushing for wear
- Re-check the hardware after a short drive
Specifications
| Brand | Warrior |
|---|---|
| Part number | 107 |
| Catalog number | W/I107 |
| UPC | 63414600107 |
| Part type | Shock absorber cross pin |
| Pin sizes offered by Warrior | 2-3/8 inch (front) and 3-1/8 inch (rear) |
| Fit type | Universal fit |
Vehicle fitment
The Warrior 107 is a universal fit and is not tied to a specific vehicle, year or chassis code. Part number 98 is a separate Warrior part for the rear of the JK Wrangler and is not this cross pin, so application can depend on the part chosen.
Measure your existing pin and confirm your vehicle’s year, model and trim before ordering.
Installation notes
A broken shock pin lets the shock float, so replace it with the shock unloaded and supported. Tighten the hardware to the specified torque and recheck after a short drive.
What’s included
The Warrior 107 comes as one cross pin.









