Overview
The TeraFlex 3990242 is a rear passenger side axle shock mount for the Jeep Wrangler TJ and LJ. The bracket is designed for Dana 44 or Dana 60 rear axles with a 3 inch diameter axle tube and is sold as a single shock mount.
It is laser cut from 3/16 inch steel and accurately formed for positioning that TeraFlex says keeps suspension geometry correct. The mount is sold in raw steel and must be welded to the axle, so it suits a builder who will weld and finish the part.
Key features
- Laser cut from 3/16 inch steel
- Accurately formed for positioning
- Sold in raw steel, ready for welding
- Ready for paint or powder coating after welding
- Designed for 3 inch diameter axle tubes
Welding and finishing the mount
Axle shock mounts take the load from the shock as the axle moves through its travel, so the bracket must sit square and be welded to the axle tube with solid penetration. Poor welds or a bracket set off-angle can crack under repeated loading on trails. Weld in short passes and let the metal cool between them to limit heat distortion, then check the bracket position again before finishing.
Choosing a shock mount means matching it to the axle and to the shock you plan to run. Confirm the shock’s eye size and mounting style before ordering, and consider whether the other shock mounts on the axle will be replaced at the same time. Shock mount welds are often inspected after a season of trail use, and cracks usually show first at the weld toes.
- Measure the axle tube before welding
- Check the shock eye and hardware size
- Inspect welds after each trail season
Specifications
| Brand | TeraFlex |
|---|---|
| Part number | 3990242 |
| UPC | 843885014867 |
| Position | Rear, passenger side |
| Material | 3/16 inch steel |
| Finish | Raw steel |
| Axle compatibility | Dana 44 or Dana 60, 3 inch axle tube |
| Quantity | One shock mount |
| Installation | Welding required |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2004-2006 Jeep Wrangler LJ (Unlimited and Unlimited Rubicon) and the 1997-2006 Jeep Wrangler TJ (65th Anniversary Edition, Rubicon, SE, Sahara, Sport and X).
The 2007-2018 Wrangler JK and earlier Wrangler YJ are not in this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Welding is required, so this mount is not a bolt-on part. Have a qualified welder fit it, then finish the welded area with paint or powder coating.
What’s included
One axle shock mount.









