Overview
The ARB BP-51 rear shock mount kit, part VM80010039, is the rear fitting kit for the 2018–2019 Jeep Wrangler (JL), in two-door and Unlimited four-door models. It is required when fitting BP-51 rear shocks.
The kit is designed so that driveline, braking and steering operation are not altered. The mount location is rear.
Key features
- Rear fitting kit
- Required for BP-51 rear shocks
- Mount location rear
- Developed so driveline, braking and steering are not altered
Fitting kits and the rear setup
A rear shock mount kit sits between the shock and the vehicle’s mounting structure, so its fit decides how the shock loads the body. Mismatched brackets can bind the shock, cause early bushing wear or shift the shock’s working range. Keep the kit with the shocks at all times and check the fit before the vehicle is driven.
When installing a mount kit, clean the mounting surfaces and check that the bolts seat fully without forcing them. Once the kit is in, watch for clearance to the spare tire carrier, exhaust and brake lines as the suspension moves through its travel. Re-check the hardware after the first few drives on rough ground.
- Replace worn or elongated mount holes
- Inspect bushings and bolts at each tire rotation
- Check bolts for thread damage before reinstalling
Specifications
| Brand | ARB 4×4 Accessories |
|---|---|
| Part number | VM80010039 |
| Type | Rear shock mount kit |
| Mount location | Rear |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2018–2019 Jeep Wrangler (JL) in Rubicon, Sport and Sport S two-door trims, and in Unlimited Moab, Rubicon, Sahara, Sport and Sport S four-door trims.
The list does not include the 2020 and later JL or the 2007–2018 JK. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The kit is required when fitting BP-51 rear shocks, so order it alongside the rear shocks.
What’s included
The kit is a single rear fitting kit. Compare the box contents with your installation plan before starting.









