Overview
The Warrior 106 is a shock absorber cross pin for replacing worn or broken pins on the shock mount. It has a universal 3.125 inch spread. Cross pins hold the shock eye in place at each end of the shock.
Warrior offers two sizes: 2-3/8 for fronts or 3-1/8 for rears. A separate Warrior part, #98, is named for the rear of the JK Wrangler.
Key features
- Replacement cross pin for worn or broken shock pins
- Universal 3.125 inch spread
- Front size 2-3/8 and rear size 3-1/8
- Separate #98 pin named for JK Wrangler rear
Signs of a worn pin
A shock cross pin keeps the shock eye from moving in its mount, so a worn pin can let the shock rattle or sit crooked. Shock mounts take repeated impact, and the pins can wear, crack or bend over time. Replacing a loose pin early can prevent damage to the shock eye and bushing.
Before buying a replacement, measure the existing pin’s diameter and the spacing of the mount. Pin size and mount design vary, so a pin that looks similar may not seat correctly. Check the shock eye for wear, and inspect the bushing for cracking when the pin is removed.
- Measure the existing pin diameter
- Note whether the pin is for front or rear
- Inspect the shock eye for cracks
- Replace loose or bent shock pins
Specifications
| Brand | Warrior |
|---|---|
| Item number | 106 |
| UPC | 63414600106 |
| Spread | 3.125 inch, universal |
| Sizes offered | 2-3/8 (fronts) or 3-1/8 (rears) |
Vehicle fitment
The 106 is not a fit-all part, since a cross pin has to match the shock mount and pin size. Measure the existing pin and confirm the front or rear size before installing. The JK Wrangler rear uses Warrior’s separate #98 pin.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
Confirm the package quantity matches the installation before starting.









