Overview
The ARB Old Man Emu BP-51 Fitting Kit, part VM80010005, is a rear fitting kit for the Toyota Land Cruiser 200 Series. It is needed with the BP-51 shock absorber BP5160003 and applies to models with KDSS suspension. It covers the 2007–2011 and 2013–2021 Toyota Land Cruiser in Base and Heritage Edition trims.
It is a companion part rather than a shock absorber, so it does not replace the BP-51 shock it is used with.
Order the kit and the BP5160003 shock together, and check that the shock suits your Land Cruiser’s year and suspension type. The kit is used as part of that setup and should not be installed on its own.
Key features
- Rear fitting kit for the Toyota Land Cruiser 200 Series
- Required for the BP-51 shock BP5160003
- Intended for models with KDSS suspension
- Part of the Old Man Emu BP-51 range
Matching the kit to your suspension
KDSS is a hydraulic suspension system used on some Land Cruisers to limit body roll through the corners. A fitting kit made for that setup should only be used on vehicles that match it, since a mismatch changes how the shock sits in its mounts. Check the suspension type on the vehicle before ordering.
When the kit is installed, the rear shock and its mounting points should be checked together. Look for cracks in the brackets, loose fasteners and bushings that have split or hardened. Because the shock is required with the kit, replace worn parts as a set. Inspect them again after any hard off-road use.
- Confirm the suspension type before ordering
- Check that the rear shock is the BP5160003 before fitting
- Re-tighten fasteners after the first drive
Specifications
| Brand | ARB 4×4 Accessories |
|---|---|
| Part number | VM80010005 |
| Kit type | Rear fitting kit |
| Shock it is required for | BP5160003 |
| Suspension | Models with KDSS suspension |
| Shock series | Old Man Emu BP-51 |
Vehicle fitment
It covers the 2007–2011 and 2013–2021 Toyota Land Cruiser in Base and Heritage Edition trims. Fit should be confirmed against your vehicle’s year, model and trim before ordering.
Other Land Cruiser years outside that list, and other Toyota models, are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The kit is needed with the BP5160003 shock and applies only to models with KDSS suspension, so confirm your vehicle’s suspension type before fitting it.
What’s included
Compare the box contents with your installation plan first. The kit contents are the fitting hardware only.
Not included: The BP-51 shock BP5160003, which the kit is required for.









