Overview
The Artec Industries RE1201R is a 3/4 inch rod end kit with a right-hand thread, made for suspension or steering links that need a rod end. The rod end lets a link pivot at its end and adds strength, reliability and flexibility.
Midwest Control Products Corp is the maker of these rod ends. The chromoly body and polished chrome finish pair with a heat-treated bearing steel ball.
Key features
- 3/4 inch bore
- Right-hand thread
- High strength chromoly body with polished chrome finish
- Heat-treated bearing steel ball with hard chrome polished surface
- Injection molded nylon race for a quiet, tight joint
Pairing left and right rod ends
Links on many suspension and steering setups use a left-hand rod end on one side and a right-hand rod end on the other, so the length can be adjusted by turning the link. Before assembly, confirm which hand each end needs and mark the parts so they are not mixed up during installation. A mismatched pair can look right at first but leaves the link unable to reach its set length.
Once the joint is installed, check that the jam nut locks the threads and that the joint still moves freely through its range. Inspect the rod end periodically for play, cracked housings and dry or gritty movement. Keeping the joint clean and protected from road debris helps it last through repeated trail use.
- Mark each end before assembly
- Confirm thread hand on both sides
- Check the jam nut after setting length
- Inspect for play and dry movement
Specifications
| Brand | Artec Industries |
|---|---|
| Part number | RE1201R |
| UPC | 816791028280 |
| Bore | 3/4 inch |
| Thread direction | Right hand |
| Body | Chromoly, polished chrome finish |
| Ball | Heat-treated bearing steel, hard chrome polished |
| Race | Injection molded nylon |
| Fitment | Universal fit |
Vehicle fitment
This rod end is not tied to a vehicle. Its suitability depends on the bore, the right-hand thread and the load your link carries, rather than on a year, make or model.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the thread is right hand, confirm it matches the link it threads into and the other end of the assembly before tightening anything down.
What’s included
The kit includes the rod end. Confirm the contents when the package arrives.
Not included: Plan to supply jam nuts and other hardware, then confirm what arrives in the package.









