Overview
The Artec Industries TA1401L is a left-hand tube adapter that attaches your links to rod ends. It has a 7/8 inch – 14 shank and a 1 inch bore.
It is a universal fit part, so it is not tied to a particular make, model or year.
Key features
- Left-hand thread direction
- 7/8 inch – 14 shank
- 1 inch bore
- Universal Fit, Artec part number TA1401L
Matching adapters to rod ends
Tube adapters sit between the link and the rod end, so their threads and bore set how the whole linkage fits together. Before buying one, measure the shank and bore on the rod end and the tube you plan to use. A mismatch in either dimension will stop the parts from threading together or leave the joint loose under load. Inspect the threads for damage, galling or debris before assembly and clean them if needed.
Adapters like this often get replaced together with the rod ends they connect, since worn threads on one part quickly wear the other. When rebuilding a linkage, check the jam nut, feel the rod end ball for play and sight down the tube for bends. Tighten everything to the fastener specs for your build and recheck the joint after the first few trail runs.
- Check thread direction on both ends first
- Clean threads before threading parts together
- Inspect rod ends for play at each service
Specifications
| Brand | Artec Industries |
|---|---|
| Part number | TA1401L |
| UPC | 816791023414 |
| Shank | 7/8 inch – 14 |
| Bore | 1 inch |
| Thread direction | Left hand |
| Fitment | Universal Fit |
Vehicle fitment
Artec gives Universal Fit for this adapter, so it is not matched to a specific make, year or model.
No vehicle years or chassis codes are stated. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Left-hand threads turn the opposite way from standard right-hand threads, so confirm the adapter matches the rod end before threading it on.
What’s included
Check the package contents against your installation before starting.












