Overview
The Artec Industries TA1401R is a right-hand tube adapter used to attach links to rod ends. It has a 7/8 inch – 14 shank and a 1 inch bore, and it is the right-hand version of the TA1401L.
Universal Fit is listed, so the adapter is not matched to a specific vehicle. It belongs to Artec’s fabrication heim joint parts and suits custom linkage.
Key features
- Right-hand thread direction
- 7/8 inch – 14 shank
- 1 inch bore
- Universal Fit, Artec part number TA1401R
Pairing left and right adapters
Many tie rod and link setups use one left-hand and one right-hand end so the overall length can be adjusted by turning the tube. A right-hand adapter needs to be paired with the correct opposite-direction part on the other side of the adjustment. Mixing directions by accident is a common mistake, so label each part as you remove it from the box.
When replacing a worn adapter, look at the rod end thread for galling and the bore for elongation. Replace the adapter if the threads are rounded or the shank has stretched. Keep the jam nut snug against the adapter once the length is set, and recheck it after rough trail use.
- Label left and right parts during installation
- Check threads for galling before reuse
- Keep the jam nut snug after setting length
Specifications
| Brand | Artec Industries |
|---|---|
| Part number | TA1401R |
| UPC | 816791023421 |
| Shank | 7/8 inch – 14 |
| Bore | 1 inch |
| Thread direction | Right hand |
| Fitment | Universal Fit |
Vehicle fitment
No vehicle is named for this adapter. Universal Fit is the only fitment given.
Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Right-hand threads tighten clockwise, the standard direction, so this adapter suits a right-hand threaded rod end.
What’s included
Check the package contents against your installation before starting.












