Overview
The Artec Industries SP1201 is a set of two 3/4 inch high misalignment spacers for one rod end. A misalignment spacer shifts a rod end sideways so the joint lines up with its mounting point, which helps when linkage cannot sit straight on the mount.
It is universal fit, so it is not tied to a particular make, year or model. It is filed under fabrication heim joint parts and suits custom linkage work where the rod end and spacer are chosen to fit the layout.
Key features
- Two high misalignment spacers included for one rod end
- 3/4 inch bore
- Universal Fit, not vehicle-specific
- Artec Industries part number SP1201, UPC 816791023261
Using spacers in custom linkage
A misalignment spacer lets a rod end sit off-center so the joint can line up with a mount that the link cannot reach straight on. In practice, the spacer changes the angle the link carries, so it is worth checking how the joint moves at full travel. The spacer should sit squarely against the rod end, with the bore and thread engagement set before the joint is loaded.
Spacers are often set up alongside a jam nut and a sleeve or bushing, and all of these parts affect the final alignment. Check the assembly after the first few drives, looking for wear on the spacer faces and any change in how the link moves. Replacing a worn spacer and rod end together keeps the joint in a predictable position.
- Check joint movement at full travel
- Seat the spacer square to the rod end
- Set jam nuts after alignment
- Inspect spacer faces for wear
Specifications
| Brand | Artec Industries |
|---|---|
| Part number | SP1201 |
| UPC | 816791023261 |
| Included | 2 misalignment spacers |
| Bore | 3/4 inch |
| Fitment | Universal Fit |
Vehicle fitment
It is universal fit, so no specific vehicle, year or model applies. Compatibility depends on the rod end and linkage it is paired with.
Match the spacer to your linkage layout before ordering, since no vehicle years or models are tied to it.
Installation notes
Check that the 3/4 inch bore of the spacer matches the rod end before assembly, since the spacers are sized for that bore.
What’s included
Two misalignment spacers for one rod end.
Not included: the rod end itself, which the spacers are made to work with.









