Overview
The Artec Industries RE1201L is a 3/4 inch rod end kit with a left-hand thread, made for suspension or steering links that need a rod end. A rod end is the joint at the end of a link that lets it pivot, and this one is designed to combine strength with flexibility.
The body is high strength chromoly. Midwest Control Products Corp makes these rod ends, and the kit suits budget-minded builds.
Key features
- 3/4 inch bore
- Left-hand thread
- High strength chromoly body with polished chrome finish
- Heat-treated bearing steel ball with hard chrome polished surface
- Injection molded nylon race that keeps the joint quiet and tight
Choosing a rod end
A rod end is a ball joint set in a threaded or eye body, placed at the end of a link such as a track bar, control arm or steering tie rod. It lets the link pivot through its travel while still carrying load, so suspension movement and steering input put steady stress on the joint. Dirt and water work into the ball and race over time, which is why play tends to build up gradually.
When choosing a rod end, match the bore to the pin it will sit on, confirm the thread direction against the tube or link it threads into, and consider the load the link will carry on your build. Rod ends are often replaced in pairs on the same axle or steering link, since both sides wear at similar rates and mismatched joints can change the geometry.
- Measure the pin diameter against the bore before assembly
- Check thread direction on both ends of the link
- Inspect for play, grease leakage or a torn dust boot
- Replace a worn joint before it loosens under load
Specifications
| Brand | Artec Industries |
|---|---|
| Part number | RE1201L |
| UPC | 816791028273 |
| Bore | 3/4 inch |
| Thread direction | Left hand |
| Body | Chromoly, polished chrome finish |
| Ball | Heat-treated bearing steel, hard chrome polished |
| Race | Injection molded nylon |
| Fitment | Universal fit |
Vehicle fitment
This rod end is a universal fit for suspension and steering uses, so the bore, thread and load needs of your link decide whether it suits the job.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
This is a left-hand thread, so check it against the link or tube it threads into before installation, and confirm the bore matches your pin.
What’s included
Check the package contents against your installation before starting.
Not included: Check the package contents against your installation before starting. Jam nuts and other hardware may need to be sourced separately.









