Overview
The Artec BR1032 is an adjustable panhard mount for axle, sold under part number BR1032 for any 3-link or 4-link layout. It works as a mounting point for a panhard bar, the rod that keeps the axle from shifting sideways, also called a track bar in many builds.
The mount is designed with clearance for hydraulic rams and coilovers, and its styling and strength suit the truss it fits. It is intended for joints with a 1.75 inch mounting width, such as 3/4 inch and 7/8 x 3/4 inch rod ends used with high misalignment spacers.
Key features
- Three holes at 5, 6 and 7 inches from axle centerline let you tune the suspension.
- Mount can be centered on the axle or offset toward the front edge.
- Suits a 1.75 inch joint width, including 3/4 inch and 7/8 x 3/4 inch rod ends.
- Compatible with 3-link and 4-link builds.
- Strength and style matched to the truss it attaches to.
- Can be trimmed to fit a 3.0 inch axle tube.
Choosing the hole position
Picking a hole on a panhard mount is a balance between lateral control and room for the rest of the suspension. A hole further out changes the bar’s angle more through travel, and a hole closer in keeps the angle gentler. Consider how the bar will sit with coilovers or rams in place, since those parts also change the axle’s path.
Test the chosen position with the suspension at ride height and again at full compression. Look for binding at the rod ends and for contact with the frame or shocks. Inspect the mount welds and the truss connection on a regular schedule, especially after heavy use.
- Clearance with rams or coilovers
- Check binding at full compression
- Inspect truss welds
Specifications
| Brand | Artec Industries |
|---|---|
| Part number | BR1032 |
| UPC | 816791020376 |
| Type | Panhard mount |
| Joint mounting width | 1.75 inch |
| Hole positions | 5, 6 and 7 inches from axle centerline |
| Axle tube | 3.0 inch, can be trimmed to fit |
| Orientation | Centered on axle or offset to front edge |
| Sold as | Single |
Vehicle fitment
No vehicle is named for this mount. Fit depends on your axle tube size, link layout and rod end width, so measure those before choosing a hole position.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Set the hole position and orientation at fitting time, since each one shifts the bar’s angle and clearance. Only trim the mount where the axle tube requires it.
What’s included
One panhard mount, sold as a single.
Not included: panhard bar, rod ends and spacers.









