Overview
The Artec Industries BR1018 is a single inner frame bracket for universal applications, meant for the front driver side or the rear passenger side of a frame. It is made from 1/4 inch thick boxed steel and sits at a 25 degree angle, with a 2.625 inch mounting width and a 9/16 inch bolt hole for cartridge-style joints.
The tapered sides let the bracket sit at an angle on the frame, so less bracket hangs off the side to catch on rocks. The skid plate wraps the joint, and the grease fitting faces up, which helps keep it from breaking off on impact.
Key features
- Built for the front driver side or rear passenger side
- Grease fitting faces up, so the joint can be mounted grease-up
- Skid plate for the joint that does not restrict movement
- Tapered sides allow mounting at an angle on the frame
- 2.625 inch mounting width with 9/16 inch bolt hole
- Can be drilled out for 1.25 inch rod ends with spacers
Frame position and joint angle
An inner frame bracket carries the joint’s load into the frame, so its position and angle matter as much as its steel thickness. A bracket that sits too far out tends to catch rocks and roots, while one set too far in can limit joint travel. Mock up the position with the joint in place and check how the skid plate sits against the ground.
Greasing a frame-mounted joint is easier when the fitting faces up, but the fitting still needs room to clear the bracket. Check the joint for wear at the rod end, torn boots and bracket cracks near the welds or bolt holes, especially after hard trail use. Those checks take little time and catch problems before they leave the axle loose.
- Skid plate condition
- Grease fitting clearance
- Frame bolt torque
Specifications
| Brand | Artec Industries |
|---|---|
| Product code | BR1018 |
| UPC | 816791020253 |
| Material | 1/4 inch thick boxed steel |
| Angle | 25 degree |
| Joint mounting width | 2.625 inch |
| Bolt hole | 9/16 inch |
| Position | Front driver or rear passenger |
| Quantity | Single bracket |
| Finish | Bare steel |
Vehicle fitment
This is a universal application bracket with no vehicle named. It suits the front driver side or rear passenger side of a frame. Check frame clearance and the 25 degree angle against your build before mounting.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Confirm whether the bracket bolts on or needs welding before fixing it in place. Because the grease fitting faces up, check clearance above the joint first. Test the 25 degree angle on the frame before final attachment.
What’s included
One BR1018 inner frame bracket in bare steel, with the skid plate built into the bracket.
Not included: The joint itself is not included, since the bracket is made to hold a separate cartridge joint.









