Overview
The Artec Industries BR1002 is a pair of flat bottom shock mounts, sold as a set of 2, designed to be welded directly to an axle or any flat surface. The mounts are CNC cut from 3/16″ steel plate, precision bent and tumble finished, so they are ready to weld in place.
The mounts are universal fit and are not built for one vehicle. Check tube diameter and clearance on your own build before welding.
Key features
- Set of 2 flat bottom shock mounts
- CNC cut from 3/16″ steel plate
- Precision bent and tumble finished
- 1/2″ mounting holes
- Designed to be welded to an axle or any flat surface
- The flat bottom design is built to be three times as stiff as two separate tabs.
Welding flat mounts safely
A flat bottom mount takes its load across a broad face, which makes the weld bead the weak point when it is done poorly. The mount should sit flat against the axle or plate with no gaps, and the surface should be cleaned to bare metal before any weld. Because the mount is welded rather than bolted, there is no easy way to fix a bad joint later without cutting it off.
Think about the shock and the mount together. The shock needs a clear path through its travel, and the mount has to hold the shock end without flexing. Check the shock eye and bushings for wear before installing new mounts, and replace a shock with play at the eye or a bent body first. Inspect the welds after the first few trail runs.
- Make sure the mount sits flat with no gaps
- Clean surfaces to bare metal before welding
- Check shock eyes and bushings for wear
- Inspect the welds after early trail use
Specifications
| Brand | Artec Industries |
|---|---|
| Part number | BR1002 |
| UPC | 816791020086 |
| Material | 3/16″ steel plate |
| Finish | Tumble finished |
| Mounting holes | 1/2″ |
| Sold as | Set of 2 (pair) |
| Fitment | Universal fit |
| Type | Flat bottom shock mount |
Vehicle fitment
Artec lists these mounts as universal fit, so they are not built for one vehicle. Compatibility depends on the axle or flat surface you weld them to.
The mounts are universal fit, so no specific year or model applies. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Installation requires welding: the mounts are welded directly to the axle or flat surface rather than bolted on. Have a qualified fabricator make structural welds on an axle housing.
What’s included
A set of 2 flat bottom shock mounts (sold as a pair).
Not included: shock absorbers and welding supplies.









