Overview
The Artec Industries Coil Correction Plate, part number BR1041, is a weld-on steel plate for coil springs that sit on flat perches. It gives the spring a base that follows the curvature of the coil, which Artec says helps eliminate spring bowing in coil suspensions that use flat coil perches. The plates are sold in pairs and are not built for a specific vehicle.
Uneven spring bottoms can rest unevenly on a flat plate. The plate is made from 1/2-inch thick steel and precision CNC machined.
Key features
- Contoured base that follows the curvature of the spring
- Made from 1/2-inch thick steel
- Precision CNC machined
- Designed to help keep springs from unwanted rotation
- 1/2-inch coarse thread hole for coil retainer plates
- Designed to weld to a flat bottom plate
- Sold in pairs
Setting up coil perches
A coil spring works best when it seats evenly on a flat surface. If the spring bottom is uneven, the coil can rest on one side and load the perch unevenly, which can lead to tilt or early wear. A contoured base helps the spring sit more evenly under load.
Before welding, check the perch for flatness and the spring for an uneven bottom coil. Confirm that the perch can take a weld without warping, and plan the position so the plate centers under the spring. Coil retainer plates and any spacers should be sourced before the job starts.
After installation, check the spring seat for tilt and look for shifting under load. Recheck the welds and retainers after the first trail runs, since a loose plate can allow the spring to rotate.
- Check the perch for flatness before welding
- Plan plate position so it centers under the spring
- Recheck welds and retainers after first use
Specifications
| Brand | Artec Industries |
|---|---|
| Part number | BR1041 (also A/IBR1041) |
| UPC | 816791020468 |
| Type | Spring mount |
| Material | Steel |
| Thickness | 1/2 inch |
| Thread | 1/2-inch coarse |
| Tube diameter | Any |
| Sold as | Pair |
| Fitment | Universal fit |
Vehicle fitment
It is universal fit with any tube diameter, so it is not built for one make, model or year. It applies to coil springs on flat coil perches.
Check that your perch is flat and your spring bottom is uneven before ordering. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The plates are designed to be welded to your bottom flat plate, so the job calls for welding equipment and the skill to weld steel to a perch. Weld with eye protection and proper ventilation.
What’s included
The product is sold as a pair of coil correction plates.
Not included: Coil retainer plates, which the 1/2-inch coarse thread hole accepts, are needed for installation and are not included.









