Overview
The Artec Industries BR1049 is a pair of high clearance shock brackets made from 1/4″ thick bare steel. The brackets are a heavy replacement for worn shock brackets, and they require welding to install.
The bracket is universal fit rather than built for one vehicle, with tube diameter any. Confirm the mounting location and shock clearance on your own build before welding.
Key features
- Heavy bracket built for tough use
- Made from 1/4″ thick steel
- Bare steel, unfinished
- Designed to replace worn shock brackets
- Sold as a pair
- Requires welding to install
Shock brackets and damper load
A shock bracket takes the full load of the damper every time the suspension moves, so it is one of the parts that sees the most cyclic stress. Heavy steel helps it resist bending, but the weld to the axle or frame is where cracks usually start. Good fit-up and full welds matter more than the thickness alone when the bracket is installed.
Replacing worn brackets often means checking the shock eye and its bushing at the same time. A bushing with play lets the shock shift on the bracket and wears the hole larger over time. Check the bracket for cracks and bent tabs after rough use, and recheck the weld area after the first few trail runs.
- Set the bracket position before the final weld
- Coat bare steel after welding to slow corrosion
- Check the shock eye and bushing at the same time
- Inspect for cracks after rough trail use
Specifications
| Brand | Artec Industries |
|---|---|
| Part number | BR1049 |
| UPC | 816791020567 |
| Material | 1/4″ thick steel |
| Finish | Bare steel |
| Sold as | Pair |
| Tube diameter | Any |
| Fitment | Universal fit |
| Type | Shock tab |
Vehicle fitment
This bracket is universal fit rather than built for one vehicle. Fit depends on where the shock mounts and how much clearance the build has.
The bracket is listed without any named make, year or model. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The bracket is welded in place, not bolted, so position it and check shock clearance before the final weld. Because the steel is bare, paint or coat the welded area if you want corrosion protection.
What’s included
A pair of high clearance shock brackets.
Not included: shock absorbers and the welding needed to attach the brackets.









