Overview
The Artec Industries Adjustable Inner Frame Bracket (part number BR1039) is a control arm mount for fabricators, sold as a single bracket. It has a 2.625 inch mounting width with a 9/16 inch bolt hole for common sized cartridge joints such as Johnny Joints, Flex Joints and Ballistic Joints.
The bracket has one inch of separation between holes for adjustability, and a floating top gusset that suits any height frame. It is a universal fit and works with any tube diameter.
Key features
- Control arm mount, sold as a single bracket
- 2.625 inch mounting width with a 9/16 inch bolt hole
- Can be drilled out to a larger hole for 1.25 inch rod ends with spacers
- One inch of separation between holes for adjustability
- Floating top gusset for any height frame
- Grease fitting access on top
- Skid plate on the bottom that wraps around the joint and does not restrict movement
Choosing joints and bracket layout
A control arm mount holds a joint at the frame end of the arm, so the joint size and hole layout have to agree before anything is cut or welded. Cartridge joints differ in shank size and bolt pattern, so the bracket hole should be sized to the joint you buy. Mock up the arm and joint before final welding.
Adjustable holes let the mount move to suit different frame heights, which can help set the arm angle. Keep the frame and mount fully supported while welding to avoid distortion, and recheck the joint after the first trail runs for play or binding.
- Measure the joint shank before drilling
- Mock up the arm and mount before welding
- Grease the joint through the top fitting
- Inspect welds after the first trail runs
Specifications
| Brand | Artec Industries |
|---|---|
| Part number | BR1039 |
| UPC | 816791020444 |
| Product type | Adjustable inner frame bracket (control arm mount) |
| Mounting width | 2.625 inches |
| Bolt hole | 9/16 inch |
| Hole spacing | One inch separation between holes |
| Rod end option | Can be drilled out for 1.25 inch rod ends with spacers |
| Tube diameter | Any |
| Sold as | Single |
| Fitment label | Universal Fit |
Vehicle fitment
The Artec BR1039 is not vehicle-specific. It is a universal fit, and the floating top gusset and hole spacing suit frames of any height.
Match the 2.625 inch mounting width and 9/16 inch bolt hole to the joint you plan to use, and confirm the dimensions before welding.
The bracket suits any frame, so check the dimensions against your joint and frame before fabricating. Confirm the year, model and trim of your vehicle before ordering.
Installation notes
Fabrication parts like the inner frame bracket should be installed by an experienced fabricator. Make sure joints and mounts are fully supported, tighten fasteners to the torque range for the hardware you use, and inspect the finished assembly after the first miles of driving.
What’s included
One adjustable inner frame bracket.
Not included: Joints, bolts and spacers are needed separately from the bracket.









