Overview
The Artec Industries BR1030 is an adjustable frame panhard mount for 3-link or 4-link suspension. It carries a Panhard bar, also called a track bar, and has three frame holes set 2, 3.25 and 4.5 inches down, so the bar can be moved to a better height.
The mount is built for joints with a 2.625″ mounting width, including bushings and cartridge joints. It is universal fit with any tube diameter, so it is not designed around a particular vehicle.
Key features
- Three frame holes at 2, 3.25 and 4.5 inches drop
- Helps fine tune suspension height
- Built for 2.625″ mounting width joints
- Intended for 3-link or 4-link builds
Panhard bar basics
The Panhard bar is a lateral link that locates the axle left to right, and it works alongside the control arms to keep the axle from sliding under cornering. Its frame end matters as much as the axle end, because the frame mount sets the arc the bar travels through. Taller setups often need the bar raised, while lower mounts can reduce that arc but may change how the axle centers at ride height.
When rebuilding the suspension, check the joint, the bar ends and the frame bracket together. Wear in one part changes how the others load. Replacing a worn joint and inspecting the bracket welds at the same time saves a second trip to the garage.
- Look for play at the joint before anything else
- Check the bar ends for bends after rough trail use
- Recheck axle centering after any height change
Specifications
| Brand | Artec Industries |
|---|---|
| Part number | BR1030 |
| UPC | 816791020352 |
| Type | Panhard mount |
| Hole drop from frame | 2, 3.25 and 4.5 inches |
| Mounting width | 2.625″ |
| Tube diameter | Any |
| Quantity | Single |
| Fitment | Universal fit |
Vehicle fitment
Fitment is universal and not based on a particular vehicle. The mount suits 3-link and 4-link layouts that use a 2.625″ joint width. Match the frame height to your bar before welding or bolting.
Mounts with a different joint width will not suit this part. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Choose the frame hole that gives the bar the height you need. Recheck axle centering once the bar is installed.
What’s included
A single adjustable frame panhard mount.
Not included: the 2.625″ joint that the mount is built to take.









