Select your vehicle

Artec Tube Tabs – TB1012

Artec Industries

Shop Artec Industries Gussets Tabs on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Artec Industries TB1012 tube shock tabs designed for 1.5 inch tubing
  • Cut from 1/4 inch steel with a 1/2 inch bolt hole
  • Hole center 1.25 inches from the top of the tube
  • Two pieces per set

Description

Overview

The Artec Industries TB1012 is a pair of tube shock tabs designed for 1.5 inch tubing. They are cut from 1/4 inch thick steel with a 1/2 inch bolt hole, and the hole center sits 1.25 inches from the top of the tube.

Shock tabs like these are welded onto tubing so a shock can bolt to them. The tube diameter is 1-1/2 inches, and the fitment is universal, so the tube size and shock location decide whether they suit your build.

Key features

  • Cut from 1/4 inch thick steel
  • 1/2 inch bolt hole for the shock
  • Designed for 1.5 inch tubing
  • Hole center 1.25 inches from the top of the tube
  • Includes two pieces

Tube shock tab placement

Placing a shock tab on a tube changes the shock’s angle and leverage, so the mounting point should be picked with the full suspension travel in mind. A tab set too low can bind at full compression, while one set too high can limit shock stroke. Mark the location with the suspension at ride height, then cycle it through travel before welding.

Tab welds are where tube shock tabs usually fail, so clean the tube surface and fit the tab tightly against the tube before welding. Check the weld for cracks after the first trips, and recheck the shock bolt for tightness. Worn bushings in the shock eye are a sign to inspect the tab for movement.

  • Mark the tab location at ride height first
  • Cycle the suspension through travel before welding
  • Check the weld and shock bolt after the first trips

Specifications

Brand Artec Industries
Part number TB1012
UPC 816791023612
Type Misc. mounting tab
Material Steel, 1/4″ thick
Bolt hole 1/2″
Hole center from top of tube 1.25″
Tube diameter 1-1/2 inches
Sold as Pair (two pieces)

Vehicle fitment

The tabs are universal fit, so they depend on the tube diameter and where the shock is mounted rather than on a model.

Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Mark the hole 1.25 inches down from the top of the tube before welding the tab in place, so the shock lands where your design expects it.

What’s included

Two tabs.

Not included: Shocks, bolts and welding are not included.

SKU: A/ITB1012 Category:

Specification

Shipping weight 0.80 lbs
Package dimensions 6.00 × 6.00 × 6.00 in
brands

Questions & Answers

What tube size do the TB1012 shock tabs fit?

They are designed for 1.5 inch tubing, which is 1-1/2 inches. Measure your tube before welding, since the tabs are not made for other diameters.

Does the TB1012 have a hole for a shock?

Yes. Each tab has a 1/2 inch bolt hole, and the hole center sits 1.25 inches from the top of the tube, so position it with that measurement in mind.

Is the TB1012 made for a specific vehicle?

No. The tabs are universal fit, and no vehicle, year or model applies. Match the tube size and shock location to your own build instead.

Can these tabs go on a tube that is not round?

Tube shock tabs are made to sit against a round tube, so a flat or oval section needs a different tab or a fitted saddle. Check that the tab seats fully against the tube before welding to avoid a weak joint.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Artec Industries Gussets Tabs on Amazon