Overview
The Alloy USA Slip Yoke Eliminator Kit, part number 11400, is a transfer case slip yoke eliminator with a 1310 CV style yoke for 87-06 Wrangler models with an NP231 transfer case.
A slip yoke eliminator replaces the transfer case slip yoke with a fixed yoke, which lets the rear driveshaft use a CV-style joint. This kit includes a new output shaft and a new extension housing.
Key features
- Slip yoke eliminator for the NP231 transfer case
- 1310 CV style replacement yoke
- Includes a new output shaft
- Includes a new extension housing
- Direct fit
- Fits 87-06 Wrangler with NP231 transfer case
Driveline angle and CV joints
A slip yoke eliminator fixes the transfer case output in place, so the driveshaft no longer slides in and out. That change affects driveline angles and vibration, since the angle must be set so the CV joints run within their range. Check the driveline angle after installation, and compare the shaft length against the old driveshaft before fitting.
Because the output shaft and extension housing are replaced, the transfer case seals and driveshaft joints are often inspected at the same time. Worn joints or bent shafts add vibration once the slip is removed, so check them before reassembly to avoid a second trip under the vehicle.
- Check driveline angle after installation
- Inspect driveshaft U-joints or CV joints
- Confirm the transfer case is an NP231
- Check seals for leaks after the first drives
Specifications
| Brand | Alloy USA |
|---|---|
| Part number | 11400 |
| UPC | 804314237479 |
| Product type | Slip yoke eliminator kit |
| Transfer case model | NP231 |
| Replacement yoke type | 1310 CV style yoke |
| New tail shaft | Includes new output shaft |
| New extension housing | Included |
| Fitment type | Direct fit |
Measure the space behind the transfer case if size matters for your build.
Vehicle fitment
It fits 87-06 Wrangler models with an NP231 transfer case. This kit depends on the NP231 transfer case, so confirm that your vehicle has one before ordering.
Compare part number 11400 with your vehicle’s year, model, trim, engine and drivetrain so that you receive the correct part.
Confirm that your transfer case is an NP231, since the kit is built around that model. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
- Professional installation is recommended for axle, driveline and transfer case work.
- Torque every fastener to the specification for your vehicle and use the fluids your vehicle requires.
- Re-check fasteners and look for leaks after the first miles of driving.
- Read all instructions before starting, and support the vehicle on jack stands rated for its weight rather than on a jack alone.
- Wear eye protection and gloves, and replace any worn, damaged or corroded fasteners.
What’s included
A slip yoke eliminator kit with a 1310 CV style yoke, a new output shaft and a new extension housing.








