Overview
The Trail Gear Trail-Creeper Dual Transfer Case Adapter kit, part number 100001-1-KIT, adds a second transfer case to an existing transfer case so the gearing can be doubled for crawling over obstacles. It is designed to adapt a secondary case to the existing transfer case and includes the components for that job.
It fits 1984-1995 Toyota 4Runner DLX and SR5 models and 1980-1995 Toyota Pickup trims, including Base, Base Turbo, DLX, DLX Turbo, SR5 and SR5 Turbo.
Key features
- Adapts a secondary transfer case to an existing transfer case
- Adapter plate and coupler included
- Cage and main bearing installation parts included
- Replacement transmission output seal
- Magnetic drain plug and shift knob included
- Mounting hardware and transfer case and transmission block-off plates included
- 21 spline
Crawl gearing and driveline use
Adding a second transfer case lowers the gearing for slow, controlled crawling over steep or rough ground. The extra reduction lets the engine do more of the work at low speed, which helps on obstacles where a standard low range is not enough. Lower speed also means the driveline spends more time under load, so keep the vehicle in its intended range and avoid abrupt throttle changes.
After any driveline change, watch for vibration, leaks and noise from the new case and adapter joints. Check fluid levels on a regular schedule and after water crossings, since a second case adds more fluid areas to inspect.
- Use the crawl range at low speed on steep terrain
- Watch for driveshaft vibration after the change
- Inspect seals and adapter joints for leaks
Specifications
| Brand | Trail Gear |
|---|---|
| Part number | TGI100001-1-KIT |
| UPC | 70000621464 |
| Type | Dual transfer case adapter kit |
| Spline | 21 spline |
| Fitment | Direct fit |
Vehicle fitment
It fits the 1984-1995 Toyota 4Runner and the 1980-1995 Toyota Pickup in the trims named above. Other Toyota models fall outside this fitment.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Adding a second transfer case changes the driveline and shifter setup, so have the work checked by a qualified drivetrain shop before use.
What’s included
The kit includes the adapter plate, coupler, cage and main bearing installation parts, replacement transmission output seal, magnetic drain plug, shift knob, mounting hardware and transfer case and transmission block-off plates.












