Overview
The Skyjacker JC315BKSH is a 3 inch sport lift kit for the 1984-2001 Jeep Cherokee XJ. It combines front coil springs with rear leaf springs and rear U-bolts, and it includes Hydro 7000 shock absorbers at both ends. It fits the Base, Briarwood, Chief, Classic, Country, Laredo, Limited, Pioneer, SE and Sport trims of the XJ.
The kit suits owners who want a mild lift to fit larger tires on a Cherokee, or a more aggressive setup for trail use. The spec sheet gives a lift height range of 3 to 4.99 inches.
Key features
- 3 inch lift with front coil springs
- Rear leaf springs with U-bolts
- Front and rear Hydro 7000 shock absorbers included
- Rear lift with leaf springs
Mixed coil and leaf setups
A coil front and leaf rear setup gives the XJ a different ride height at each end, so the truck can sit slightly off level if the springs are not matched. Measure the front and rear heights after installation and compare them before setting the alignment. The track bar and pinion angle should also be checked because the rear leaves change axle position.
Hydro 7000 shocks at both ends help control the different spring rates. Over time, leaf packs can sag and coil seats can wear, so inspect them at each service. A lift on an older Cherokee also benefits from fresh bushings and bolts before the new parts are added.
- Measure front and rear ride height separately
- Inspect the leaf pack for sag
- Check the track bar and pinion angle after install
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | JC315BKSH |
| UPC | 70000684384 |
| Lift | 3 inch sport lift kit |
| Lift height range | 3 to 4.99 inches |
| Suspension type | Coil spring kit |
| Rear lift method | Leaf springs |
| Shocks | Hydro 7000, front and rear |
Vehicle fitment
It fits the 1984-2001 Jeep Cherokee (XJ) in the Base, Briarwood, Chief, Classic, Country, Laredo, Limited, Pioneer, SE and Sport trims.
The Grand Cherokee (ZJ and WJ) and the Liberty (KJ) use different suspension parts and are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The front coils and rear leaves make this a mixed setup, so check the front and rear ride height after install. Re-check the track bar and pinion angle, and align the front end.
What’s included
The kit includes front coil springs, rear leaf springs, rear U-bolts, and front and rear Hydro 7000 shock absorbers.








