Overview
The King Shocks 25001-278 is a non-adjustable OEM Performance front coilover shock absorber for the 2010–2017 Toyota 4Runner. It is a front driver and passenger side part with a remote reservoir, and the pack contains two shocks.
King tuned this kit for the 4Runner, with the damping curve and spring rate developed through real-world testing to improve performance and ride quality. The shock body is 2.5 in in diameter, with a monotube internal design, hard anodized 6063 aluminum alloy construction, and a heat treated 6061 aluminum piston. The bolt-on fitting works for stock height or for trucks running lifted aftermarket suspensions.
Key features
- Non-adjustable coilover design
- Monotube internal design
- Hard anodized 6063 aluminum alloy body
- Heat treated 6061 aluminum piston
- Wear bands made from a Rulon composite for wear resistance
- Remote reservoir with 2.5 diameter body
Choosing a remote reservoir coilover
A remote reservoir coilover moves the gas and oil reservoir away from the shock body, which gives the damper more room to dissipate heat during sustained trail use. Because the reservoir is a separate piece, it needs its own mounting point and hose routing. Check that the line stays clear of the tires, brake lines and suspension travel before tightening anything.
Coilover shocks carry the vehicle weight through the spring, so the mounts, bushings and spring seats are often inspected at the same time. Replacing the shocks as a pair keeps the front end balanced. After the first few trail runs, re-check the mounting bolts and look for oil seepage around the body and reservoir.
- Inspect mounts and bushings when replacing shocks
- Check reservoir hose clearance after fitting
- Replace front shocks as a pair
Specifications
| Brand | King Shocks |
|---|---|
| Part number | 25001-278 |
| UPC | 70000584710 |
| Shock series | OEM Performance |
| Position | Front, driver and passenger side |
| Adjustment type | Without adjuster |
| Quantity | 2 per pack |
| Compressed length | 16.80 in |
| Extended length | 21.69 in |
| Length | 4.89 in |
| Body diameter | 2.5 in |
| Body material | Hard anodized 6063 aluminum alloy |
| Piston material | Heat treated 6061 aluminum alloy |
| Wear bands | Rulon composite |
Vehicle fitment
It is a direct fit for the 2010–2017 Toyota 4Runner, covering the Limited, SR5, TRD Off-Road, TRD Pro and Trail trims.
Other 4Runner model years outside 2010–2017 are not in the list, and 4Runner generations before 2010 are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The shocks bolt on at stock height, and custom kits are available for trucks running lifted aftermarket suspensions. Support the vehicle securely before removing the factory coilover shocks.
What’s included
Two non-adjustable front coilover shock absorbers with remote reservoirs, packed as a pair.









