Overview
The King Shocks 25001-284 is a 2.5 Performance Series front shock kit for the 2007–2018 Jeep Wrangler JK, sold as a pair. It fits 2-door and 4-door Wranglers as a bolt-on upgrade for stock height or for trucks running lifted aftermarket suspensions.
King custom tuned this OEM performance setup, with damping and spring rate developed through real-world testing for Jeep use. The design uses large diameter micro-polished shafts and remote reservoirs connected by Aeroquip high pressure hoses. The 6063 aluminum alloy reservoirs are designed to dissipate heat quickly.
Key features
- Front shock position for 2-door and 4-door Wranglers
- Large diameter micro-polished shafts
- Remote reservoirs with Aeroquip high pressure hoses
- 6063 aluminum alloy reservoirs that dissipate heat quickly
- Damping curve and spring rate tuned for Jeep use
- Simple bolt-on installation
Before you buy
A front shock affects steering feel, body control and how the tires wear, so it is worth checking the rest of the front end before a swap. Worn ball joints, tie rod ends and control arm bushings can make a new shock feel loose or noisy. Inspect them while the wheels are off, and address any play before judging the new damping.
Remote reservoir shocks add hoses that need clear routing around the steering linkage and frame. Look for a path that avoids sharp bends and moving parts, and secure the hose with clips rather than leaving it loose. After the first drive, check the hose and clamps for chafing.
- Inspect ball joints and bushings before swapping
- Route reservoir hoses clear of steering parts
- Recheck hose clamps after the first drive
Specifications
| Brand | King Shocks |
|---|---|
| Part number | 25001-284 |
| UPC | 70000558768 |
| Shock series | Performance Series (2.5) |
| Position | Front |
| Reservoir | Remote, 6063 aluminum alloy |
| Hose | Aeroquip high pressure |
| Shaft | Large diameter, micro-polished |
| Charge | Gas charged |
| Sold as | Pair |
Vehicle fitment
It is a direct fit for the 2007–2018 Jeep Wrangler JK, including Rubicon, Sahara, Sport, Sport S, X and the 70th and 75th Anniversary trims, in standard and Unlimited bodies.
Wranglers from the 2018 JL generation onward are not in the listed range, and the earlier TJ and LJ generations are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The kit is set up for a bolt-on swap at stock height and also suits trucks running lifted aftermarket suspensions. The reservoirs and hoses mount separately from the shock body, so plan for both mounting points. Secure the vehicle on level ground before removing the factory shock.
What’s included
A pair of front Performance Series shock kits with remote reservoirs and Aeroquip high pressure hoses.














