Overview
The King Shocks OEM Performance Series 25001-214 is a pair of gas-charged rear shock absorbers with piggyback reservoirs for the 2009–2013 Ford F-150. King builds them as bolt-on upgrades for the factory rear suspension, aimed at owners who drive the same truck every day and also take it off road.
King builds each kit with damping curves and spring rates set through real-world testing on the vehicle it is sold for. The rear version uses the same materials and tight tolerances as King’s race shocks. It carries a maximum tire size of 33 inch, and rear kits allow a 15% increase in wheel travel. The shocks are sold as a pair.
Key features
- Bolt-on rear upgrade that replaces the factory shocks with no cutting or welding.
- Piggyback reservoirs with external capacity to increase fluid volume and heat dissipation.
- 2.5 inch diameter shock bodies for steady damping under demanding conditions.
- Rear kits allow a 15% increase in wheel travel.
- Serviceable valve adjustment with simple hand tools, the same design used on King race shocks.
- Damping curves and spring rates developed through real-world testing.
- Maximum tire size of 33 inch.
Choosing a rear shock setup
Rear shocks do most of the work controlling body motion when a truck is loaded, braking or crossing uneven ground. A shock that is worn or undersized lets the rear end bounce and can make the tires lose contact on rough trails. Replacing them in pairs keeps damping even from side to side, which helps the truck track straight.
Gas-charged shocks with piggyback reservoirs resist fade better during repeated hard use because the fluid has more room to cool. When choosing a setup, consider how much lift and tire size the truck runs, since larger tires put more load on the shock and its mounts. Many owners replace rear bump stops and mounting bushings at the same time for a tidy job.
- Check shock eye and stud bushings for cracking
- Inspect shock bodies for oil leaks or dents
- Look for even wear on the rear tires
Specifications
| Brand | King Shocks |
|---|---|
| Part number | 25001-214 |
| UPC | 700005378202 |
| Product line | OEM Performance Series |
| Position | Rear |
| Reservoir | Piggyback |
| Charge type | Gas charged |
| Shock body diameter | 2.5 inch |
| Maximum tire size | 33 inch |
| Lift height / drop | 0 in. |
| Mounting | Direct fit |
| Sold as | Pair |
Vehicle fitment
It fits the 2009–2013 Ford F-150 in FX4, King Ranch, Lariat, Lariat Limited, Limited, Platinum, STX, XL and XLT trims. It is a direct fit that replaces the factory rear shocks on those trucks.
Confirm fit for your vehicle’s year, model and trim before ordering, especially for F-150 model years outside 2009–2013 or other Ford models.
Installation notes
Installation is a bolt-on job with no cutting or welding to the truck, and valve adjustment needs only simple hand tools. King offers a custom length rod end for trucks running a lifted aftermarket suspension, so measure your rear ride height before choosing that option. Support the truck on stable jack stands before you work under it.
What’s included
Sold as a pair of rear shocks with piggyback reservoirs.
Not included: Confirm the mounting hardware and bushings are on hand before installation.












