Overview
The Bilstein 5100 Series 33-313146 is a rear shock absorber for the 2003–2024 Toyota 4Runner, the 2007–2014 Toyota FJ Cruiser and the 2010–2024 Lexus GX 460. It is rated for a rear lifted height of 0.5 to 2.5 inches and works on vehicles without X-REAS suspension.
The shock has a zinc-plated, 46mm smooth non-coilover body with a stem top mount and an eyelet bottom mount. Its collapsed length is 14.91 inches and its extended length is 23.03 inches. Measure your current shock if body diameter matters for your install.
The unit is a monotube shock kit with a gas-charged design and a digressive piston. Check whether your vehicle has X-REAS suspension before fitting it, since this shock works only on vehicles without it.
Key features
- Rear lifted height of 0.5 to 2.5 in
- Not for X-REAS suspension
- 46mm zinc-plated smooth non-coilover body
- Collapsed length 14.91 in and extended length 23.03 in
- Monotube gas-charged design
Rear shock replacement tips
Rear shocks control body motion over bumps and help keep the tires in contact with the ground when the axle moves through travel. A shock that has lost damping may feel bouncy or float over repeated bumps, and a worn unit can also affect stability under braking. Because the shock works with the bump stops and springs, inspecting the whole rear suspension at the same time gives a clearer picture of what needs replacing.
Mounting points are the first thing to check. The stem top and eyelet mounts should be free of cracks, and the bushings should be snug without being torn. Rear shocks are often replaced in pairs so that both sides damp the same way. Keep the rear lift within the range this shock covers and recheck the fit after any suspension change.
- Check stem and eyelet mounts for cracks
- Look for oil on the shock body
- Replace rear shocks in pairs
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 33-313146 |
| Shock series | 5100 Series |
| Position | Rear |
| Rear lifted height | 0.5 to 2.5 in |
| Body diameter | 51mm (field) / 46mm (short details) |
| Collapsed length | 14.91 in |
| Extended length | 23.03 in |
| Top mount | Stem |
| Bottom mount | Eyelet |
| X-REAS suspension | Not compatible |
| Shock type | Monotube shock kit, gas-charged |
| Fitment type | Direct fit |
Vehicle fitment
It is a direct fit for the 2003 through 2024 Toyota 4Runner, the 2007 through 2014 Toyota FJ Cruiser and the 2010 through 2024 Lexus GX 460.
Toyota 4Runner models before 2003, Tacoma and Land Cruiser models, and any vehicle with X-REAS suspension are not on this list. Confirm your vehicle’s year, model and trim before ordering.
What’s included
Part 33-313146: one rear shock absorber, sold individually.
Installation notes
Check whether your vehicle has X-REAS suspension before fitting, since this shock works only on vehicles without it. Confirm the rear lift stays within 0.5 to 2.5 inches.











