Manual transmission shift knobs replace worn, cracked, or loose knobs on stick-shift Jeeps and trucks. The range includes chrome and leather-wrapped knobs with shift patterns, billet aluminum styles, and complete kits for transmissions such as the T4, T170, AX5, and AX15. Brands include Drake, Crown Automotive, Rugged Ridge, and Rampage. Open a product page for thread size and part number.
Manual Trans Shift Knob
Showing 1–12 of 28 resultsSorted by popularity
Why replace a shift knob
A shift knob takes daily hand contact, heat, and sunlight, so the finish cracks, the shift pattern fades, and the knob can loosen. A replacement restores comfort and feel, and some owners change to a heavier or shorter knob for a different shifting experience.
Choices run from simple factory-style replacements to billet designs and specific-vehicle kits.
Thread, pattern, and transmission fit
The most important detail is how the knob attaches. Many knobs thread onto the shifter lever, and thread size, such as 3/8-16 in one listed kit, must match. Others use a press-on or set-screw design. The transmission model matters as well because shifter levers differ between units like the T90, T14, T15, T150, T4, T170, AX5, and AX15.
Shift patterns, such as 5-speed or 6-speed layouts, are engraved or printed on the knob, so choose the pattern that matches your gearbox.
Style and material
- Leather or leather-wrapped: Comfortable and close to the factory look.
- Billet aluminum: Heavier, rigid, and durable, though it can be hot or cold to the touch.
- Chrome or black finishes: Match the interior trim.
- With or without a pattern: A blank knob avoids a mismatch if your gearbox is unusual.
Installation
Installation is usually simple. Unthread or pull off the old knob, clean the lever, and thread on the new one, using thread locker or a jam nut if the kit includes one so it stays tight. Adjust height so the pattern faces forward, and test every gear with the clutch pressed and the engine off before driving. Confirm fitment for your exact year, make, and model, and check the manufacturer's specifications.
Care and troubleshooting
Wipe leather and chrome with a mild cleaner and avoid harsh solvents on engraved patterns. If a knob rattles, check the jam nut, thread engagement, and any boot or trim ring around the base.
A knob that spins freely may have stripped threads on the knob or the lever, and either one may need replacement. Do not try to force a knob with the wrong thread size onto a lever, since you can ruin both parts and make shifting unsafe.
The knob's mass and shape change how comfortable it is during long drives. A heavier knob smooths out transmission vibration, while a short, lightweight knob shortens the hand's travel. Leather feels warm in winter, but metal can be uncomfortable in extremes of temperature.
Take care that the shifter boot and trim ring are compatible. Some knobs need a specific ring or collar, and the threaded part may be longer or shorter than the stock one. If the knob bottoms out on the threads before it seats, do not force it. Use a shorter lever or a different knob.
Reverse lockout rings and pull-up collars, if your transmission has one, also affect knob design. Check that the new knob does not interfere with these before you drive.
For a quick fit check, remove the old knob, note whether it threads, presses, or locks with a set screw, and measure the thread diameter and pitch with a thread gauge or a nut you know. That takes a minute and prevents buying the wrong style.
Popular Manual Trans Shift Knob brands
- Drake (10)
- Crown Automotive (6)
- Rugged Ridge (3)
- Jeep (3)
- Mr. Gasket Company (2)
- Omix-Ada (2)
- Rampage (2)
- RT Off-Road (1)
- B&M (1)
Manual Trans Shift Knob FAQ
How do I know which shift knob thread I need?
Check the thread size of your shifter lever, often a fine or coarse thread such as 3/8-16 in some Jeep kits, or look up your transmission model. Compare to the thread size stated in the product listing.
Can a shift knob change how shifting feels?
A heavier knob can make shifts feel smoother or more deliberate, while a lighter one feels quicker. The mechanical throw does not change, only the feel. Height and grip shape also matter.
Why does my shift knob keep coming loose?
Worn threads, a missing jam nut, or lack of thread locker are typical causes. Clean the threads, use a medium-strength thread locker, and add a jam nut if the knob supports it.
Do shift patterns matter?
Yes, an engraved pattern helps you find gears, so it should match your transmission, such as a 5-speed or 6-speed. If the pattern is wrong, choose a blank knob instead.











