Truck Bed Utility Storage Boxes
Showing 25–35 of 35 resultsSorted by popularity
-
Truck Bed Utility Storage Boxes
Undercover Tonneau Covers UnderCover Swing Case Storage Box – SC100D
Truck Bed Utility Storage BoxesUndercover Tonneau Covers UnderCover Swing Case Storage Box – SC100D
- Drivers side UnderCover Swing Case storage box, part number SC100D
- Fits 2007–2018 Chevrolet Silverado and GMC Sierra 1500, 2500 HD and 3500 HD pickups
- Tucks against the bed side when not in use
- Swings out even with the tailgate seam
SKU: UNDSC100D -
Truck Bed Utility Storage Boxes
Tuffy Truck Bed Security Lockbox – 161-01
- Tuffy 161-01 16 gauge steel truck bed security lockbox
- 710 cubic inches of lockable storage
- Pry-Guard Locking System with a 10 tumbler double bitted lock
- Bolts to factory holes without drilling
- Made for the Toyota Tacoma truck bed, with years to confirm before ordering
SKU: TFY161-01 -
Truck Bed Utility Storage Boxes
Undercover Tonneau Covers UnderCover Swing Case Storage Box – SC203P
Truck Bed Utility Storage BoxesUndercover Tonneau Covers UnderCover Swing Case Storage Box – SC203P
- Passenger side UnderCover SwingCase storage box for the 2015–2018 Ford F-150
- Swings out for access to gear without climbing into the bed
- Lockable storage with a 75lb weight capacity
- Lightweight, high impact ABS plastic, made in the USA
- Part number SC203P; 1 year warranty
SKU: UNDSC203P -
Truck Bed Utility Storage Boxes
Rampage Trail Can Utility Tool Box – 86619
- Rampage Trail Can utility tool box, part number 86619
- 14 gauge steel with a red powder coat finish
- Lift out tote tray, two slide out drawers and four screwdriver slots
- Designed to fit five gallon Jerry can mount brackets
SKU: RPP86619 -
-
Truck Bed Utility Storage Boxes
Dee Zee Red Label Utility Chest – DZ8537
- Dee-Zee Red Label utility chest, part number DZ8537
- Heavy duty Brite-Tread aluminum with crown style lid
- Lockable stainless steel paddle handles and dampened gas shocks
- Removable plastic tool tray; Universal Fit, no vehicle named
SKU: DEEDZ8537 -
-
Truck Bed Utility Storage Boxes
Dee Zee Specialty Series Padlock Side Mount Tool Box – DZ6748LOCKTB
- Dee-Zee Specialty Series padlock side mount tool box, part number DZ6748LOCKTB
- Built for professional tradesmen with increased storage
- Universal fit box; confirm it suits your truck before buying
- Confirm side mount clearance on your truck before ordering
SKU: DEEDZ6748LOCKTB
What these boxes are for
A bed box gives secure, weather-resistant storage that stays with the truck. Contractors, hunters and overlanders use them for tools, tie-downs, tow straps, fluids and spare parts. The listings here include several styles, and the right one depends on how your bed is used and how much of the bed you want left free for cargo.
Types of box
- Chest boxes: A single lid box that sits against the bulkhead or across the bed, with a simple, versatile layout.
- Saddle boxes: Straddle the wheel wells and keep the center of the bed open, with narrow versions for dual or single shocks to help lift the lid.
- Wheel well boxes: Fit between the wheel wells, and some have drawers.
- Gull-wing and double-door boxes: Open from both sides of the truck for easier reach.
- Under-bed boxes: Mount beneath the bed floor or below the rail, saving bed space.
How to choose
Measure your bed width, length and wheel well spacing before shopping. A box listed as 69 or 71 inches will not fit every truck, since short beds and long beds vary, and box width must clear the wheel wells and any bed rails or liners. Consider how you load the bed: if you haul full sheets of plywood, a saddle or low-side box may suit better than a tall chest. Think about reach too, since a deep box can be hard to access over the side of a lifted truck.
Specs to compare
Check the listed length, height and depth, the finish (brite aluminum, gloss black or textured matte black) and the lock type. Look for features like rail systems, drawers, gas struts or shocks for the lid, and weather sealing. A low-profile design helps rear visibility and keeps better aerodynamics, while a taller box holds more. Aluminum resists corrosion and keeps weight down, but check whether the box is tread plate or smooth.
Installation and use notes
Most boxes mount by clamping to the bed rails, so no drilling is typically needed, but confirm this for your model. Keep the load balanced and mind the payload rating of your truck, as tools and gear add up. Do not use the box as a place for loose heavy items that could shift during hard braking.
Confirm fitment for your truck's exact year, make, model, bed length and bed liner, and read the manufacturer's specifications. Check mounting points after the first drive, and keep locks lubricated for winter conditions.
Maintenance and common mistakes
A bed box takes weather, vibration and the occasional scrape, so look after it. Rinse off dirt, and clean with mild soap. Polish bright aluminum occasionally to restore its shine, and wax painted or black boxes to resist fading. Lubricate locks and hinges once or twice a year, and use a graphite or dry lube for locks in cold climates, so water does not freeze inside.
Check the weather seal around the lid, and replace it if it flattens or tears. Drill a drain hole only if the maker allows it, and keep the box off of standing water by leaving room for air to flow. Place heavier items low and close to the cab to keep weight distribution safe, and keep gear from sliding by using dividers or trays.
Common mistakes include ordering a box that is too wide for the wheel wells, forgetting about a bed liner or rail caps that change the clamp position, and overloading the box beyond what the truck's payload allows. Another is leaving valuables inside, since lockable boxes are a deterrent, not a vault. Review the mounting hardware after the first week of driving.
Popular Truck Bed Utility Storage Boxes brands
Truck Bed Utility Storage Boxes FAQ
How do I know which size box fits my truck bed?
Measure the inside bed width, the distance between wheel wells and the available length. Compare these to the box's listed dimensions. Also account for bed rails, liners and tonneau covers before choosing.
What is the difference between chest and saddle boxes?
A chest box is a single compartment placed across the bed. A saddle box straddles the wheel wells, leaving the center open. Saddle styles suit loads that need floor space, and chests suit simple storage.
Do these boxes require drilling the bed?
Many clamp to the bed rails, which avoids drilling. Install details vary by style and truck, so read the manufacturer's instructions for your bed. Under-bed units may use different mounting points.
Can I use a bed box with a tonneau cover?
It depends on the cover and box height. Low-profile boxes are more likely to clear a cover, but many covers are not compatible. Check clearances and the cover maker's guidance.








