Truck Bed Utility Storage Boxes
Showing 13–24 of 35 resultsSorted by popularity
-
Truck Bed Utility Storage Boxes
Better Built 61.5″ Low-Profile Saddle Truck Box with Rail System (Gloss Black) – 79211115
Truck Bed Utility Storage BoxesBetter Built 61.5″ Low-Profile Saddle Truck Box with Rail System (Gloss Black) – 79211115
- Better Built 61.5-inch low-profile saddle truck box with rail system, Gloss Black, part number B/B79211115
- Keeps the bed floor clear and sits on top of the rails
- Locks from either side with pull handles
- Deep wedge-cut tub for larger items
- Universal-fit design; confirm fit before ordering
SKU: B/B79211115 -
Truck Bed Utility Storage Boxes
Better Built 60″ Lo-Side Truck Box (Gloss Black) – 79210996
- Better Built 60-inch Lo-Side truck box in Gloss Black, part number B/B79210996
- Sits on the truck side rails and leaves bed room for other storage
- Locking pull handles and two-stage rotary latches
- Legs included for stability
- Universal fit; confirm fit for your vehicle before ordering
SKU: B/B79210996 -
Truck Bed Utility Storage Boxes
Better Built 60″ Chest Truck Box (Brite Aluminum) – 62012331
- Better Built 60-inch chest truck box in Brite Aluminum, part number B/B62012331
- Sits below the bed rails and works with tonneau covers
- Offset hinge opens the lid nearly 90 degrees against the cab
- Full-seal weather stripping and self-adjusting strikers
- Universal fit; confirm fit for your vehicle before ordering
SKU: B/B62012331 -
Truck Bed Utility Storage Boxes
Better Built 48″ Wheel Well Truck Box with 2 Drawers (Brite Aluminum) – 68012346
Truck Bed Utility Storage BoxesBetter Built 48″ Wheel Well Truck Box with 2 Drawers (Brite Aluminum) – 68012346
- Better Built 48-inch wheel well truck box with 2 drawers, Brite Aluminum, part number B/B68012346
- Adds storage in the wheel well area below the bed rails
- Compatible with tonneau covers
- Paddle handle and self-rising gas spring for one-handed entry
- Universal-fit design; confirm fit before you order
SKU: B/B68012346 -
Truck Bed Utility Storage Boxes
Better Built 48″ Wheel Well Truck Box (Brite Aluminum) – 68012344
- Better Built 48-inch wheel well truck box in Brite Aluminum, part number B/B68012344
- Uses space in the wheel well area and sits below the bed rails
- Compatible with tonneau covers
- Paddle handle and self-rising gas spring for one-handed entry
- Universal-fit design; confirm fit before ordering
SKU: B/B68012344 -
Truck Bed Utility Storage Boxes
Better Built 48″ Chest Truck Box (Brite Aluminum) – 62012330
- Better Built 48-inch chest truck box in Brite Aluminum, part number B/B62012330
- Sits under the bed rails and is compatible with tonneau covers
- Lid opens nearly 90 degrees on an offset hinge
- Gas springs allow one-handed opening and closing
- Built to fit a range of pickups, not one model.
SKU: B/B62012330 -
Truck Bed Utility Storage Boxes
Better Built 40″ Chest Truck Box (Brite Aluminum) – 79011062
- Better Built 40-inch chest truck box in Brite Aluminum, part number B/B79011062
- Mounts below the bed rails, so it works with tonneau covers
- Offset hinge lets the lid open nearly 90 degrees, even flush against the cab
- Self-rising gas springs allow one-handed entry
- Universal fit for pickup beds; confirm fit before ordering
SKU: B/B79011062 -
Truck Bed Utility Storage Boxes
Better Built 36″ Under Bed Box (Brite Aluminum) – 65010161
- Better Built 36 inch Under Bed Box in Brite Aluminum, part number B/B65010161
- Gutter design, weather stripping and T-handle lock
- Universal fit, for use under a trailer or flat bed
- Backed by a 1 year limited warranty
SKU: B/B65010161 -
Truck Bed Utility Storage Boxes
Better Built 36″ Chest Truck Box (Brite Aluminum) – 62012329
- 36-inch chest truck box in brite aluminum
- Sits below the bed rails, compatible with tonneau covers
- Full seal weather stripping and self-adjusting strikers
- Self-rising gas springs for one-handed entry
- 1 year limited warranty
SKU: B/B62012329 -
-
-
Truck Bed Utility Storage Boxes
Undercover Tonneau Covers UnderCover Swing Case Storage Box – SC100P
Truck Bed Utility Storage BoxesUndercover Tonneau Covers UnderCover Swing Case Storage Box – SC100P
- Passenger side UnderCover SwingCase storage box, part number SC100P
- Fits 2007–2018 Chevrolet Silverado and GMC Sierra 1500, 2500 HD and 3500 HD
- Lockable storage with a 75lb weight capacity
- Swing-out access, made in the USA
- 1 year warranty
SKU: UNDSC100P
What these boxes are for
A bed box gives secure, weather-resistant storage that stays with the truck. Contractors, hunters and overlanders use them for tools, tie-downs, tow straps, fluids and spare parts. The listings here include several styles, and the right one depends on how your bed is used and how much of the bed you want left free for cargo.
Types of box
- Chest boxes: A single lid box that sits against the bulkhead or across the bed, with a simple, versatile layout.
- Saddle boxes: Straddle the wheel wells and keep the center of the bed open, with narrow versions for dual or single shocks to help lift the lid.
- Wheel well boxes: Fit between the wheel wells, and some have drawers.
- Gull-wing and double-door boxes: Open from both sides of the truck for easier reach.
- Under-bed boxes: Mount beneath the bed floor or below the rail, saving bed space.
How to choose
Measure your bed width, length and wheel well spacing before shopping. A box listed as 69 or 71 inches will not fit every truck, since short beds and long beds vary, and box width must clear the wheel wells and any bed rails or liners. Consider how you load the bed: if you haul full sheets of plywood, a saddle or low-side box may suit better than a tall chest. Think about reach too, since a deep box can be hard to access over the side of a lifted truck.
Specs to compare
Check the listed length, height and depth, the finish (brite aluminum, gloss black or textured matte black) and the lock type. Look for features like rail systems, drawers, gas struts or shocks for the lid, and weather sealing. A low-profile design helps rear visibility and keeps better aerodynamics, while a taller box holds more. Aluminum resists corrosion and keeps weight down, but check whether the box is tread plate or smooth.
Installation and use notes
Most boxes mount by clamping to the bed rails, so no drilling is typically needed, but confirm this for your model. Keep the load balanced and mind the payload rating of your truck, as tools and gear add up. Do not use the box as a place for loose heavy items that could shift during hard braking.
Confirm fitment for your truck's exact year, make, model, bed length and bed liner, and read the manufacturer's specifications. Check mounting points after the first drive, and keep locks lubricated for winter conditions.
Maintenance and common mistakes
A bed box takes weather, vibration and the occasional scrape, so look after it. Rinse off dirt, and clean with mild soap. Polish bright aluminum occasionally to restore its shine, and wax painted or black boxes to resist fading. Lubricate locks and hinges once or twice a year, and use a graphite or dry lube for locks in cold climates, so water does not freeze inside.
Check the weather seal around the lid, and replace it if it flattens or tears. Drill a drain hole only if the maker allows it, and keep the box off of standing water by leaving room for air to flow. Place heavier items low and close to the cab to keep weight distribution safe, and keep gear from sliding by using dividers or trays.
Common mistakes include ordering a box that is too wide for the wheel wells, forgetting about a bed liner or rail caps that change the clamp position, and overloading the box beyond what the truck's payload allows. Another is leaving valuables inside, since lockable boxes are a deterrent, not a vault. Review the mounting hardware after the first week of driving.
Popular Truck Bed Utility Storage Boxes brands
Truck Bed Utility Storage Boxes FAQ
How do I know which size box fits my truck bed?
Measure the inside bed width, the distance between wheel wells and the available length. Compare these to the box's listed dimensions. Also account for bed rails, liners and tonneau covers before choosing.
What is the difference between chest and saddle boxes?
A chest box is a single compartment placed across the bed. A saddle box straddles the wheel wells, leaving the center open. Saddle styles suit loads that need floor space, and chests suit simple storage.
Do these boxes require drilling the bed?
Many clamp to the bed rails, which avoids drilling. Install details vary by style and truck, so read the manufacturer's instructions for your bed. Under-bed units may use different mounting points.
Can I use a bed box with a tonneau cover?
It depends on the cover and box height. Low-profile boxes are more likely to clear a cover, but many covers are not compatible. Check clearances and the cover maker's guidance.








