Steel Accessories
Showing 25–36 of 48 resultsSorted by popularity
-
Windshield Bracket
Fab Fours ViCowl (Matte Black) – VC3900-1
- Fab Fours ViCowl truck edition in matte black, part number VC3900-1
- Combines visor and cowl with front windshield protection
- Upper position; cowl type
- Fits 2019–2022 GMC Sierra 1500 and 2022 Sierra 1500 Limited
- Accepts optional lightbar inserts, which are separate items
SKU: FFIVC3900-1 -
Windshield Bracket
Fab Fours ViCowl (Black) – VC4200-1
- Fab Fours ViCowl truck edition in black, part number VC4200-1
- Combines visor and cowl with front windshield protection
- Accepts optional 20-inch lightbar insert and 4-light insert
- Upper position; windshield header type
- Made for 2019–2026 Ram 1500 trucks
SKU: FFIVC4200-1 -
Steel Accessories
DV8 Offroad Hard Top Latch Closure Mechanism (Black) – HTJL-L
- DV8 Offroad hard top latch closure mechanism in black, part number DV8HTJL-L
- Replaces the factory closure mechanisms on Jeep hard tops
- Works with aftermarket tops
- Bolts on directly
- Fits 2018–2021 Jeep Wrangler JL models
SKU: DV8HTJL-L -
Door Handle Cover/Inserts
DV8 Offroad Door Handle Inserts – D-JP-190059-AL-3
- Fits 2007–2018 Jeep Wrangler JK 2-door and Unlimited 4-door trims
- DV8 Offroad part number DV8D-JP-190059-AL-3, door handle inserts
- Cast zinc with a race-inspired dimple-die design
- Stick-on installation
- Set of 3, including one insert for the rear gate handle on 2-door models
SKU: DV8D-JP-190059-AL-3 -
Door Handle Cover/Inserts
Drake Door Handle Inserts (N/A) – JP-190015-AL-5
- Manufacturer-listed fit: 2007–2015 Jeep Wrangler (JK) Unlimited four-door
- Brushed aluminum inserts for the factory door and tailgate handles
- Set of five: four door inserts and one tailgate insert
- Stainless steel mounting hardware included
- Part number DRKJP-190015-AL-5
SKU: DRKJP-190015-AL-5 -
Door Handle Cover/Inserts
Drake Door Handle Inserts (N/A) – JP-190015-AL-3
- Manufacturer-listed fit: 2007–2015 Jeep Wrangler (JK) two-door
- Brushed aluminum inserts for the factory door and tailgate handles
- Set of three: two door inserts and one tailgate insert
- Stainless steel mounting hardware included
- Part number DRKJP-190015-AL-3
SKU: DRKJP-190015-AL-3 -
Liftgate Lift Support
Dee-Zee EZ Down Tailgate Assist – DZ43200
- Dee-Zee EZ Down tailgate assist, part number DZ43200
- Single dampened gas shock controls the tailgate drop rate
- Works with factory cables; no drilling required
- Mounts to the driver side; one assist per vehicle
- Fits 2004–2014 Ford F-150 and 2006–2008 Lincoln Mark LT
SKU: DEEDZ43200 -
-
-
What is in this category
This grouping covers the smaller steel and stainless hardware around the body of an off-road vehicle. Subcategories include hood hinges, hood latch assemblies, hood locks, windshield brackets, windshield tie-down-cargo-management kits, tail light guards, door handle covers and liftgate lift supports.
Many items are replacements for worn or rusted factory parts, and others are upgrades for trail use or security.
Common product types
- Hood latches and locks hold the hood securely, and locks add theft deterrence for the engine bay.
- Hood hinges and pin grommets replace worn or corroded parts.
- Windshield tie-down-cargo-management kits secure a folding windshield on vehicles designed for it.
- Tail light guards and rear Euroguards protect lenses from rocks and bumps.
- Liftgate struts hold the rear door open and replace tired gas supports.
Choosing and checking fitment
These parts are usually vehicle-specific. Hinges, brackets and guards change with model year and body style, so confirm fitment for your exact year, make and model. Check whether the item replaces an original part or adds to it, and whether the finish is raw, powder coated, black or stainless.
For struts, compare extended and compressed length and the force rating, since the wrong strut may fail to hold the door or may be too strong. Stainless hardware resists corrosion better than bare steel.
Installation notes
Most pieces use ordinary hand tools. Support the hood or liftgate before removing hinges or struts, as springs and gas supports store energy and can cause injury if released suddenly. Use thread locker where recommended and tighten fasteners to the specified torque.
Lock cylinders and latches should be tested several times with the hood open before you close it, to avoid being unable to release a stuck latch. Apply grease to moving parts and check for alignment so the hood closes without stress.
Further checks and care
Questions to ask before you choose
Write down the model year and body style of the vehicle and, if possible, take photos of the existing part. Ask whether the replacement matches the original in finish and mounting. For security parts, think about whether you need key convenience, and for protection parts such as tail light guards, look at material thickness. Small details like thread size and bracket orientation often make the difference between a smooth swap and a frustrating one.
Materials and construction
Steel accessories are often made from cold-rolled steel with powder coat, or from stainless steel for corrosion resistance. Check the thickness, the finish and the quality of any welds. Hood locks and latches combine steel with springs and pins, so look for smooth operation. Liftgate struts use a pressurized cylinder, and cheap ones can lose pressure quickly. Products that mimic factory parts should match mounting points exactly to avoid fitment problems.
Inspection and maintenance
Check hood hinges and latches for rust, cracks and sloppy movement, and lubricate them lightly twice a year. Look at tail light guards for loose mounting and scratches that expose bare metal. Replace rubber grommets and cushions when they harden. Liftgate struts that no longer hold the door open should be replaced before they let it fall unexpectedly. Keep spare hardware, since small fasteners can be lost on the trail.
Popular Steel Accessories brands
- Rugged Ridge (11)
- Smittybilt (5)
- Fab Fours (5)
- Kentrol (4)
- Rampage (4)
- Jeep (3)
- RT Off-Road (2)
- Poison Spyder Customs (2)
- Dee-Zee (2)
- DV8 Offroad (2)
- Body Armor 4x4 (2)
- Drake (2)
Shop Steel Accessories by type
Steel Accessories FAQ
How do I know if my liftgate strut is worn?
Common signs include a door that slowly sinks, will not stay open, or needs help to rise. Replace struts in pairs when both are weak, using the correct specification for your vehicle.
Are hood locks worth installing?
They can deter casual tampering with the engine bay and battery. Some are aftermarket add-ons that need careful installation, so check that they work with the factory latch and release, and keep the key accessible.
Do windshield tie-downs fit all vehicles?
No. They are designed for models with folding windshields and specific hinge or bracket styles. Confirm the listing matches your year, make and model. Check the product notes first.











