Select your vehicle

DV8 Offroad Hammer Forged Stubby Front Bumper with Gusseted Stinger – FBSHTB-13

DV8 Offroad

Shop Jeep Wrangler JL Bumpers on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Stubby length
  • Gusseted stinger for added reinforcement
  • Reinforced winch plates
  • High tensile strength steel
  • Front position

Description

Overview

The DV8 Offroad Hammer Forged stubby front bumper with gusseted stinger, part FBSHTB-13, is a front bumper for the 2007–2018 Jeep Wrangler JK, the 2018–2026 Jeep Wrangler JL and the 2020–2026 Jeep Gladiator JT. It has a gusseted stinger.

The Hammer Forged line is built for hardcore wheeling, with King of the Hammers style racing and crawling in mind. This stubby model is made for rock work, where protection matters most.

Heavily reinforced winch plates and thick, high tensile strength steel are used throughout. Certain parts are 1/4 inch steel and others are 3/16 inch, which DV8 says keeps strength up and weight down.

Measure your mounting area and plan the install before starting. Align the bumper and check all mounting points before fully tightening fasteners.

Key features

  • Stubby length
  • Gusseted stinger for added reinforcement.
  • Heavily reinforced winch plates
  • Thick, high tensile strength steel
  • Front position

Stubby bumpers on the trail

A stubby bumper leaves less material ahead of the grille, which can matter when a truck is driven through tight rock gaps. The trade-off is that a shorter profile can give less coverage across the lower front edge, so choose it for the trails you run most. A stinger adds reach that can help with winching angles but needs its own check for clearance.

Treat the stinger as a structural part. Look for cracks at the gusset joints after heavy pulls, and check that the stinger does not contact the bumper cover at full steering lock. Replace worn fasteners in matched sets so the load spreads evenly across the mounts. Plan the install with the front end off the ground so nothing binds.

Specifications

Brand DV8 Offroad
Part number FBSHTB-13
Position Front
Style Hammer Forged
Length Stubby
Stinger Gusseted
Material High tensile strength steel, 1/4 inch and 3/16 inch sections
Fit style Direct fit

Vehicle fitment

It fits the 2007–2018 Jeep Wrangler JK, 2018–2026 Jeep Wrangler JL and 2020–2026 Jeep Gladiator JT.

Wrangler TJ and LJ models, Wrangler model years before 2007, and Gladiator model years before 2020 are not on the list. Confirm your vehicle’s year, model and trim before ordering.

What’s included

Lay out the parts against your installation plan before starting.

Fitment

VehicleYearsTrims
Jeep Gladiator2020–202680th Anniversary, Altitude, High Altitude, Launch Edition, Mojave, Overland, Rubicon, Sport, Sport S, Willys, Willys Sport
Jeep Wrangler (JK)2007–201870th Anniversary (2-Door), 75th Anniversary (2-Door), Rubicon (2-Door), Sahara (2-Door), Sport (2-Door), Sport S (2-Door), Unlimited 70th Anniversary (4-Door), Unlimited 75th Anniversary (4-Door), Unlimited Rubicon (4-Door), Unlimited Sahara (4-Door), Unlimited Sport (4-Door), Unlimited Sport S (4-Door), Unlimited X (4-Door), X (2-Door)
Jeep Wrangler (JL)2018–202680th Anniversary (2-Door), Freedom (2-Door), Islander (2-Door), Rubicon (2-Door), Sport (2-Door), Sport S (2-Door), Unlimited 80th Anniversary (4-Door), Unlimited Freedom (4-Door), Unlimited High Altitude (4-Door), Unlimited High Altitude 4xe, Unlimited Islander (4-Door), Unlimited Moab (4-Door), Unlimited Rubicon (4-Door), Unlimited Rubicon 392, Unlimited Rubicon 4xe, Unlimited Sahara (4-Door), Unlimited Sahara 4xe, Unlimited Sahara Altitude (4-Door), Unlimited Sport (4-Door), Unlimited Sport Altitude (4-Door), Unlimited Sport S (4-Door), Unlimited Willys (4-Door), Unlimited Willys Sport (4-Door), Willys (2-Door), Willys Sport (2-Door)

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

What does the gusseted stinger mean?

A gusset is a reinforcing plate that adds strength at a joint, and this bumper has a gusseted stinger. Lay out the parts against your installation plan before starting.

Does it fit a Jeep Wrangler JL?

Yes. It fits the 2018–2026 Jeep Wrangler JL. The same fitment covers the 2007–2018 Wrangler JK and the 2020–2026 Gladiator JT as well.

Is this model stubby or mid-length?

It is a stubby front bumper, and its position is front. Measure your mounting area to confirm the fit against your vehicle before ordering the bumper.

Why does the stinger matter for rock driving?

A stinger extends the front of the bumper, so check that it clears the grille and hood before fitting. Inspect its welds after rough trail use, since the extension carries the stress of pulls.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Jeep Wrangler JL Bumpers on Amazon