Jeep CJ7 Bumpers and Grille Guards
28 bumpers and grille guards listed for the 1976–1986 Jeep CJ7
Every part on this page is listed by its maker for this model; the most represented brands are Rugged Ridge, Kentrol and Warn. Open a part for its specs, part number and the exact model years and trims it covers, or select your year below to check fitment on every page.
Showing 1–24 of 28 resultsSorted by popularity
-
Bumpers
Smittybilt Tubular Jeep Front Bumper (Stainless Steel) – JB44-FNS
- Fits 1976–1983 CJ5, 1976–1986 CJ7, 1987–1995 YJ, 1997–2006 TJ and 2004–2006 LJ
- One-piece tubular front bumper in stainless steel finish
- Pre-cut vertical uprights; robotically welded
- Full width; light mounts not included
- Part number S/BJB44-FNS
SKU: S/BJB44-FNS -
Bumpers
Smittybilt Tubular Jeep Front Bumper (Black) – JB44-FN
- Fits 1976–1983 Jeep CJ5, 1976–1986 CJ7, 1987–1995 YJ, 1997–2006 TJ and 2004–2006 LJ
- One-piece tubular front bumper with pre-cut vertical uprights
- Robotically welded construction
- Full width; light mounts included; D-ring mounts not included
- Part number S/BJB44-FN
SKU: S/BJB44-FN -
Bumpers
Rugged Ridge XHD Front Bumper Kit, Stinger/Standard (Black) – 11540.59
- Fits 1976–1986 Jeep CJ5 and CJ7, 1981–1985 Scrambler, and 1987–1995 YJ, 1997–2006 TJ and 2004–2006 LJ Wrangler
- XHD front winch mount bumper kit with stinger and standard bumper ends
- 4mm thick steel with factory fog light cut outs
- D-ring mounts and light mounts included
- Part number RUG11540.59
SKU: RUG11540.59 -
Bumpers
Rugged Ridge Short Base Winch Mount Front Bumper Center Section (Black) – 11540.40
- Fits 1976–1986 Jeep CJ5 and CJ7, 1981–1985 Scrambler, and 1987–1995 YJ, 1997–2006 TJ and 2004–2006 LJ Wrangler
- Stubby center section of the XHD modular front bumper, black powder coat
- Winch mount compatible, with D-ring mounting brackets included
- Light mounts not included
- Part number RUG11540.40
SKU: RUG11540.40 -
-
-
-
Front Bumpers
Rugged Ridge Dual Tube Front Winch Bumper with Center Hoop (Stainless Steel) – 11563.03
Front BumpersRugged Ridge Dual Tube Front Winch Bumper with Center Hoop (Stainless Steel) – 11563.03
- Stainless steel dual tube front winch bumper with center hoop
- Cut-out for winch mounting; winch plate not included
- Fits CJ5, CJ7, Scrambler and Wrangler YJ, TJ and LJ
- Welded end caps, limited lifetime warranty
SKU: RUG11563.03 -
Front Bumpers
Rugged Ridge Dual Tube Front Winch Bumper with Center Hoop (Black) – 11561.03
- Textured black dual tube front winch bumper with center hoop
- Cut-out for winch mounting; winch plate not included
- Fits CJ5, CJ7, Scrambler and Wrangler YJ, TJ and LJ models
- Welded end caps, limited lifetime warranty
SKU: RUG11561.03 -
Front Bumpers
Rugged Ridge 3 Inch Dual Tube Front Bumper with Center Hoop (Black) – 11560.01
- 3 inch dual tube front bumper with center hoop in high gloss black, non-winch style
- Fits CJ5, CJ7, Scrambler and Wrangler YJ, TJ and LJ
- Smooth ground welds and welded end caps
- Limited lifetime warranty
SKU: RUG11560.01 -
Front Bumpers
Rugged Ridge Double X Striker for Front Modular Bumper (Black) – 11540.25
- Double X Striker for the XHD front modular bumper in textured black
- Made from .120 wall tubing, bumper not included
- Made for CJ5, CJ7, Scrambler and Wrangler YJ, TJ, LJ and JK
- Mounting tabs accept 3/4 inch D-ring shackles
SKU: RUG11540.25 -
Grille Guards
Rugged Ridge Hoop Over-rider for Modular Front Bumper (Black) – 11540.14
- Fits Jeep CJ5, CJ7, Scrambler and Wrangler YJ, TJ, LJ and JK per the manufacturer list
- Textured black powder-coated steel hoop over-rider
- Bolts directly onto XHD front bumpers
- For 2 and 4-door models
SKU: RUG11540.14 -
Rear Bumpers
Rugged Ridge 3 Inch Stainless Steel Tube Rear Bumper (Stainless Steel) – 11522.01
- Fits Jeep CJ3, CJ5, CJ6 and CJ7, Scrambler, Willys CJ and Wrangler YJ and TJ
- 3-inch stainless steel tube rear bumper
- Welded end caps and mounting hardware included
- Bolt-on installation with no drilling
- Room for an oversized tire
SKU: RUG11522.01 -
Front Bumpers
Rugged Ridge Front Stainless Steel Tube Bumper with Hoop (Stainless Steel) – 11520.01
- 3 inch double tube front bumper with over-rider hoop in polished 304 stainless steel
- Fits Jeep CJ, Scrambler and 1987–2006 Wrangler models
- Welded end caps, bolt-on installation with no drilling
- No winch, light or D-ring mounts
SKU: RUG11520.01 -
-
-
Rear Bumpers
Rampage Double Tube Rear Bumper with Receiver Hitch (Stainless Steel) – 8448
- Stainless steel double tube rear bumper with 2-inch receiver
- 304 stainless steel polished to a mirror finish
- Robotically welded, one-piece design
- 2-inch receiver hitch, not tow rated
- Fits Jeep CJ5, CJ7, Wrangler YJ, TJ and LJ models
SKU: RPP8448 -
Rear Bumpers
Rampage Double Tube Rear Bumper with Receiver Hitch (Black) – 7648
- Fits 1976–1983 and 1976–1986 Jeep CJ5 and CJ7, and Wrangler YJ, TJ and LJ models
- Black double tube rear bumper, robotically welded
- 2-inch receiver for accessory racks only, not rated for towing
- Zinc undercoat with dual powder coat finish
- One-piece welded design
SKU: RPP7648 -
Front Bumpers
Rock Hard 4X4 Parts Extreme Duty Winch Mount Front Bumper with Grill Guard (Black) – RH4010
Front BumpersRock Hard 4X4 Parts Extreme Duty Winch Mount Front Bumper with Grill Guard (Black) – RH4010
- Extreme Duty full-width winch bumper with grille guard for classic Jeeps
- 1/4 inch CNC laser cut and bent steel, black powder coat
- Winch mounted low in the bumper without affecting airflow
- Light tabs and D-ring mount included; must reuse factory hardware
SKU: RFPRH-4010 -
Front Bumpers
Kentrol 42 Inch Front Stainless Steel Bumper without Holes (Stainless Steel) – 30471
- Kentrol 42 inch stainless steel front bumper without holes in the face
- 304 grade stainless steel with stainless hardware
- Pre-drilled license plate holes
- Made for the CJ5, CJ6, CJ7 and Scrambler
SKU: KEN30471 -
Front Bumpers
Kentrol 54 Inch Front Stainless Steel Bumper without Holes (Stainless Steel) – 30430WH
Front BumpersKentrol 54 Inch Front Stainless Steel Bumper without Holes (Stainless Steel) – 30430WH
- Kentrol 54 inch solid-face stainless steel front bumper, no holes
- 304 grade stainless steel, replaces the factory bumper
- Mounting hardware included; no license plate holes
- Fits 22 Jeep and Willys vehicles from 1945 to 1986
SKU: KEN30430WH -
Front Bumpers
Kentrol 54 Inch Front Stainless Steel Bumper without Holes (Stainless Steel) – 30430
- Kentrol 54 inch stainless steel front bumper without holes in the face
- 304 grade stainless steel with stainless hardware
- License plate mounting holes pre-drilled
- Made for the CJ5, CJ6, CJ7 and Scrambler
SKU: KEN30430 -




















