Overview
The Ranch Hand FBF921BLR is a Legend Series front bumper replacement for the 1992–1996 Ford Bronco, F-150, F-250 and F-350, and for the 1993–1995 F-150 Lightning. It requires removing the factory tow hook and fog lights.
It is a frame-mounted, one-piece welded bumper made from 4in. schedule 40 pipe and diamond plate, with a 12 gauge tubing grille guard and a 2in. receiver. The punched plate insert is made for the specific vehicle. Light mounts are not included with this version.
This Legend bumper fits the Bronco and the F-150 Lightning as well as the F-150, F-250 and F-350 of those years. The punched plate grille insert is specific to make and model, with no expanded metal. The factory tow hook and fog lights come off for this version, and light mounts are not included, so any lighting needs its own mounting.
Key features
- Frame-mounted, one-piece fully welded construction
- 4in. schedule 40 pipe and diamond plate
- 12 gauge tubing grille guard with wraparound headlight protection
- Vehicle-specific punched plate grille insert
- Standard 2in. receiver
- Factory tow hook and fog lights must be removed
- Super polyester black powdercoat finish
Older Ford wiring and frame care
Trucks from the early 1990s often have aging wiring, brittle clips and corroded ground points. Because the factory tow hook and fog lights come off for this bumper, the old harness needs to be capped, labeled and secured so it does not chafe against the frame. Check the connectors and grounds before the new bumper is fitted, since access is easier with the old bumper removed.
Steel bumpers on older frames benefit from a close look at the frame rails and mounting brackets. Surface rust and worn bolt holes are common on trucks of this age. Clean the contact areas, use new hardware and treat bare steel with primer. Because the bumper adds weight, check suspension and tire condition when the truck returns to regular use.
Specifications
| Brand | Ranch Hand |
|---|---|
| Part number | FBF921BLR |
| UPC | 848917001327 |
| Series | Legend |
| Position | Front |
| Width | Full |
| Material | Steel, built from schedule 40 pipe 4in. in size, diamond plate and 12 gauge tubing |
| Finish | Black, super polyester powdercoat |
| Receiver | 2in. |
| Light mounts | Not included |
| Winch mount | Not included |
| D-ring mount | Not included |
| Fit type | Direct fit |
Vehicle fitment
It fits the 1992–1996 Ford Bronco, F-150, F-250 and F-350, and the 1993–1995 F-150 Lightning.
It does not fit Ford trucks from 1997 on. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Remove the factory tow hook and fog lights before mounting this bumper.
What’s included
- Bumper with grille guard and a 2in. receiver
Not included: Lights, light mounts and winch.









