Select your vehicle

ARB Old Man Emu BP-51 Fitting Kit – VM80010028

ARB 4x4 Accessories

$134.95In stock
Buy on Amazon

See similar parts on Amazon

Price and availability as of Nov 17, 2026 7:00 AM MST, from Amazon.com, and subject to change. The Amazon listing has the current details.

Check out with your Amazon account. Amazon handles delivery and returns.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Front fitting kit for the 2010 and newer Toyota 4Runner
  • Part number VM80010028
  • Used with part number BP5190002R/L
  • Fits 2010–2021 4Runner, eight trims

Description

Overview

The ARB Old Man Emu BP-51 Fitting Kit, part number VM80010028, is a front fitting kit for the Toyota 4Runner. It is used with part number BP5190002R/L, which is sold as a right and left pair. It fits the 2010–2021 Toyota 4Runner in the Limited, Nightshade, SR5, SR5 Premium, TRD Off-Road, TRD Off-Road Premium, Trail and Venture trims.

The kit belongs to the BP-51 range and is intended to be fitted with the matching BP-51 front components.

The kit is a front fitting kit used with BP5190002R/L, and it fits several 4Runner trims from 2010 to 2021. Confirm the trim on your vehicle’s door sticker or title before ordering. Toyota models other than the 4Runner, and years outside 2010–2021, are not covered, so do not assume a fit outside that range. Order the BP-51 front components that part number BP5190002R/L refers to alongside the kit so the setup matches.

Key features

  • Front fitting kit for the Toyota 4Runner
  • Used with part number BP5190002R/L
  • Part of the Old Man Emu BP-51 range

Front-end wear and checks

A front fitting kit sets the geometry that connects the front suspension to the frame, so small changes at the mounts affect steering feel and tire wear. Inspect the kit at regular intervals, looking for cracked or distorted brackets, loose fasteners and any movement at the mounting points. Retorque fasteners after the first few trail runs, since new hardware often settles.

When the BP-51 components are replaced, it is common to renew the matching fittings at the same time, so every part of the setup wears together. Keep the right and left sides paired, and check that the kit sits square before tightening. A squeak or clunk over rough ground is a reason to stop and inspect before continuing.

  • Check fasteners after the first few trail runs
  • Look for cracks around mounting points
  • Replace worn components as a matched set
  • Inspect bushings and boots for tears

Specifications

Brand ARB 4×4 Accessories
Part number VM80010028
Kit type Front fitting kit
Used with Part number BP5190002R/L
Shock series Old Man Emu BP-51

Vehicle fitment

It fits the 2010–2021 Toyota 4Runner in the Limited, Nightshade, SR5, SR5 Premium, TRD Off-Road, TRD Off-Road Premium, Trail and Venture trims.

Toyota models other than the 4Runner, and 4Runner years outside 2010–2021, are not covered. Confirm your vehicle’s year, model and trim before ordering.

What’s included

Check the package contents against your installation before starting.

Not included: The BP-51 front components that part number BP5190002R/L refers to.

Fitment

VehicleYearsTrims
Toyota 4Runner2010–2021Limited, Nightshade, SR5, SR5 Premium, TRD Off-Road, TRD Off-Road Premium, Trail, Venture

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Does the ARB VM80010028 fit a Toyota 4Runner?

Yes, if your 4Runner is a 2010–2021 model in one of the listed trims: Limited, Nightshade, SR5, SR5 Premium, TRD Off-Road, TRD Off-Road Premium, Trail or Venture. Other years are not in the list.

Is this a front or rear kit?

It is a front fitting kit. It is used with the front part number BP5190002R/L, which covers the right and left sides.

Can this kit be used without the BP-51 front parts?

The kit is made for use with part number BP5190002R/L, so it is intended to be fitted with those matching BP-51 components rather than on its own.

Should the front fittings be replaced together with the BP-51 components?

Yes, it is generally sensible to renew matching components together. Mixing worn and new parts can change geometry and wear the new pieces faster. Inspect both sides before deciding.

What signs suggest a front fitting kit needs attention?

Look for play at the mounts, clunking over bumps, uneven tire wear and visible cracks around the brackets. Wandering or pulling on the highway can also point to a loose or worn fitting. Stop and inspect before continuing on the trail.

Ready to order?

Order this part on Amazon and check out with your Amazon account. Amazon handles delivery and returns.

Buy on Amazon