Overview
The Dana Spicer 5-178X is a forged, lubeable U-joint from the 1350 series, with an outside snap ring and a 1.188in cup size. It is an O.E.M. replacement, with an outside to outside measurement of 3.625.
It is a universal fit by series joint, so no truck or Jeep is named. Check the 1350 yoke and cup dimensions before selecting it for a driveline.
Key features
- Forged cross
- Lubeable design
- O.E.M. replacement
- Outside snap ring
- Cup size of 1.188in
Things to check
Outside snap ring joints are retained from the outer face of the yoke ear, so the ring can be seen and checked without disassembling the shaft. Before installing, look for a clean seat and make sure the ring sits fully in its groove. A snap ring that is only partly seated can let a cup back out under load, so press the cup gently and check the ring with a pick before reinstalling.
Because the joint is lubeable, grease should be added after assembly and the seals watched for leaks during the first drives. Joints in this series are often replaced in sets with the other U-joints on the same shaft, since uneven wear changes the angles through the driveline. Keep shaft balance in mind when a joint is replaced, and recheck the driveline angles once everything is back in place.
Specifications
| Brand | Dana Spicer |
|---|---|
| Part number | 5-178X |
| UPC | 23913121013 |
| Series | 1350 |
| Construction | Forged cross |
| Lubeable | Yes |
| Snap ring style | Outside |
| Cup size | 1.188in |
| Outside to outside | 3.625 |
| Fit | Universal fit by series |
Vehicle fitment
No vehicle or year is named for this 1350 series joint. Its fit depends on the yoke dimensions rather than a model name. Confirm fit for your vehicle’s year, model and trim before ordering.
Joints in other series are separate parts. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Outside snap rings seat on the outer face of the yoke ear, so confirm the groove position on your yoke before assembly.
What’s included
The joint is a single U-joint. Check the package contents against your installation before starting.









