Overview
The Dana Spicer 5-789X is a universal joint, the cross-shaped coupling that lets a driveshaft flex through its arc. Dana Spicer says its U-joints are interchangeable with existing parts, so the part number does not change when a joint is replaced.
Match the joint to your driveshaft before fitting, using yoke and cap size.
Key features
- Interchangeable with existing Spicer parts.
- Engineered for a tighter fit and better balance capability
- The design is intended to reduce driveline vibration.
- Computer-designed bearing plate and tolerance-controlled manufacturing
Universal joint basics
A universal joint lets the driveshaft change angle as the axle moves on its springs. Each joint has a cross with four trunnions that ride in bearing caps, and the caps have to fit the yoke closely for the joint to work smoothly. Joints that are worn or undersized can vibrate, clunk or bind, and they can take the driveshaft with them if they fail.
Replace joints in pairs where the driveshaft has two, and check the driveshaft’s phasing so the yokes line up. Grease the joint at regular intervals if it has fittings, and inspect the seals when the driveshaft is off. A balanced driveshaft with good joints tends to run smoother at highway speed.
- Yoke and cap size match
- Phasing of the two joints
- Seal and grease condition
- Driveshaft balance after replacement
Specifications
| Brand | Dana Spicer |
|---|---|
| Part number | 5-789X |
| Type | Universal joint for driveshafts |
Vehicle fitment
This joint carries only a Universal Fit tag, with no year, model or driveshaft attached. Universal joints differ by yoke and cap size, so measure your existing joint before fitting.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
One universal joint is included, with no extra hardware or caps.









