Overview
The Dana Spicer 5-134X is a forged, lubeable crossover U-joint for 1310 to 1330 series driveshafts. It has outside snap rings, 1.062in cup sizes on both ends, and outside to outside measurements of 3.2190in on side A and 3.625in on side B.
It is a universal fit crossover, so the yoke at each end decides whether it suits a driveline. The side A and side B measurements differ, so match each side to the yoke it will meet.
Key features
- Crossover from 1310 to 1330 series
- Forged cross
- Lubeable design
- Outside snap rings
- Cup size of 1.062in on both sides
- Different outside to outside lengths on each side
Matching the two sides
An asymmetric crossover joint only works when each side sits on the correct yoke. The two outside to outside figures differ, so the side with the shorter measurement needs to go to the matching yoke on the driveshaft. Lay the old joint beside the new one and compare the orientation before removing the old part, so the shaft can be reassembled in the same position.
Outside snap rings are retained from the outside of the yoke ear, so the ring positions can be checked by eye during installation. Seat each cup fully, make sure the cross moves freely, and then grease the lubeable cups until fresh grease appears at the seals. Recheck the driveline angles after the shaft is refitted, since a crossover that sits at the wrong angle can cause vibration at speed.
Specifications
| Brand | Dana Spicer |
|---|---|
| Part number | 5-134X |
| UPC | 23913250683 |
| Type | Crossover, 1310 to 1330 |
| Construction | Forged cross |
| Lubeable | Yes |
| Snap ring style | Outside |
| Cup size A | 1.062in |
| Cup size B | 1.062in |
| Outside to outside A | 3.2190in |
| Outside to outside B | 3.625in |
| Fit | Universal fit crossover |
Vehicle fitment
No vehicle, year or model is named for this 1310 to 1330 crossover. Fitment depends on the yoke at each end, so confirm both sides before assembling a driveline.
Joints outside the 1310 to 1330 crossover pairing are different parts. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the two outside to outside figures differ, confirm which side goes to the 1310 yoke and which to the 1330 yoke. Grease the lubeable joint after assembly.
What’s included
The joint is a single crossover. Check the package contents against your installation before starting, including any hardware and grease.









